Question:
I have a single axle trailer and want to go with the axle-less Timbren product. I want make it a two axle set up now and handle about 10K pounds. The trailer deck is built to handle 11K pounds. Q? Can I run two timbren axle-less one in front of the other, so a total of 4? If so, I believe you have a 5200 pound or 5500 pound axle-less set up. Can you provide part #s for the four axle-less setup with hub and electric brakes for all of the axle-less setup? Thank you
asked by: Mike
Helpful Expert Reply:
You can run Timbren axle kits in tandem for a tandem axle trailer. For the Timbren setup you would want 2 sets of the part # ASR5200S01.
For hub drums you would want the part # 8-201-5UC3-EZ which will fit the spindles and will give you a 6 on 5-1/2 inch wheel bolt pattern. For brake assemblies you would want the # 23-459 for the right hand side and part # 23-458 for the left hand side.
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
Timbren Axle-Less Suspension - Spindle Only - Regular Tires - 5200 lbs
