How to Find Which Replacement Vent Lid Replaces Cracked Vent Lid on 1987 Lynx Prowler Camper

Question

Question:

I have an older camper a 1987 Lynx Prowler 22. During the snowstorm this week my vent covers cracked and need to be replaced. Can you tell me which cover i need to buy? Thanks

asked by: Joe M

1

Helpful Expert Reply:

When measuring for a replacement vent lid, you will want the outside dimension of the housing that extends through the trailer roof. This dimension is typically 14 by 14 inches.

Closely examine the remaining portion of the vent, looking for a manufacturer name or model number. If you cannot find that information, you can examine the replacement lids we offer (see link) and match them up by the dimension of the housing and the style of hinge. Each replacement lid will have a detailed photo somewhere on the product page showing the style of the hinge.

Unfortunately, I don't have any reference that would tell me what vent your trailer originally used.

expert reply by: Mike L

1

click to enlarge

Answer 1

Yes, since the fan of the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan #MA00-04401M is 12 volt you could reverse the direction of the fan by reversing the polarity of the motor.

view full answer...

Answer 2

A C921 and 921 are going to be interchangeable. In fact, if you look closely as a 921 bulb #30-90-021 it does have C921 printed on it. I have included a picture for you.

view full answer...

Answer 3

For an A-frame jack that meets that diameter criteria, I recommend the A-Frame Trailer Jack by Dutton-Lainson #DL22530 . This jack will have an inner tube diameter of 1- 3/4 inches and an outer diameter of 2 inches. It is constructed of heavy duty…

view full answer...

Answer 4

While the Rack'Em Fitz-All Enclosed Trailer Ladder Rack #RA-28 was designed to fit on trailer with a rain gutter, we have had several install it on their trailer without rain gutters. I have also included our review video below where you can…

view full answer...

Answer 5

Hello Gary. The Metal Low Profile Replacement Cover #BV0534-00 is made to work with the Ventline Ventadome roof vent model V2110. I do not have a way to look up exactly what Ventline vent you have on your 2017 Thor Class C, so if you have something…

view full answer...

Answer 6

Yes, the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger, #PD4135K will work wonderfully as a replacement for your Elixir model EXL-45. It is a 35 amp rated unit that is a 2-in-1 AC/DC distribution panel and…

view full answer...

Answer 7

The difference between the MaxxFan Roof Vent w/ 12V Fan #MA00A04301K and the MaxxAir MaxxFan Mini Roof Vent #MA00-04301M is the height of the fan and the roof thickness they will fit. The mini roof vent extends 2-7/8" above roof when closed…

view full answer...

Answer 8

You can replace your plastic vent cover #BV0554-01 with the metal lid part #BV0534-00 that you referenced and you'd be set.

view full answer...

Answer 9

We offer a replacement metal roof vent cover that fits the standard 14 x 14-inch roof vents that are typically found on RVs. Ventline part #BV0534-00 is a plain metal finish flat lid with a continuous type hinge. This is the only metal lid we offer…

view full answer...

Answer 10

It does not, the recommended installation kit for the Ventline Ventadome Roof Vent part #V2110SP-24 that you referenced would be the Installation Kit #344270KITW.

view full answer...

How to Find Which Replacement Vent Lid Replaces Cracked Vent Lid on 1987 Lynx Prowler Camper

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching