Does Hopkins 12V Socket With Utility Light HM55125 Have a Power Switch

Question

Question:

Can the light be turned off/on?

asked by: Terry

0

Expert Reply:

The Hopkins 12V Socket w/ Utility Light # HM55125 does indeed feature an on/off switch on the underside of the unit which will allow you to light up the area as you're attempting to plug in your 12V accessory.

I've linked you to a video featuring this item.

expert reply by: Mike L

0

click to enlarge

Answer 1

Yes, the unit uses 14 gauge wire that can handle 15 amps. **Hopkins 12-Volt Socket with Utility Light with Power Wire and Fuse Assembly #HM55125. The unit comes with a 20A fuse so you will need to swap it out for a lower fuse like a 7.5, it is the…

view full answer...

Answer 2

Yes, the Hopkins 12-Volt Socket with Utility Light with Power Wire and Fuse Assembly #HM55125 does have screw holes that can be used to mount. You can use these holes as a way to mount this to your truck bed.

view full answer...

Answer 3

Both of the 12V power sockets From Hopkins Manufacturing are great. They both come with 17 feet of wire and fuse included for installation. The only real difference between the Hopkins 12-Volt Socket with Utility Light with Power Wire and Fuse…

view full answer...

Answer 4

It looks like your Coleman PowerChill Cooler uses a 12V plug to connect to a 12V power source. Splicing the cooler's wiring to the tail light circuit on your trailer will overload the system and I do not recommend powering the cooler this way.…

view full answer...

Answer 5

The best option I have to install a 12 volt power outlet in a truck bed would be to use the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly part #HM55115 and wire this directly to the battery. This would need to be wired directly to…

view full answer...

Answer 6

Yes, you can install Hopkins 12-Volt Socket with Utility Light #HM55125 in place of your existing light. But the socket/light is only available with the wire. Even though would will not need the extra wire its always good to have extra wire laying…

view full answer...

Answer 7

The Hopkins 12-Volt Socket with Utility Light with Power Wire and Fuse Assembly #HM55125 uses 14 gauge wire. It comes with a 20A fuse. We do not have a kit per say but you could just pull the fuse if you wanted to cut power to it. Or you could wire a…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Does Hopkins 12V Socket With Utility Light HM55125 Have a Power Switch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching