Shorter Wheel Stud Recommendation for a Trailer Hub 8-247-50UC3
Question:
The wheel studs are too long for my wheels. I wont be able to use a standard lug wrench to remove. They need to be about 1/2 inch shorter. what wheel stud part number would work for this drum?
asked by: Jim C
0
Expert Reply:
The wheel studs of the hub part # 8-247-50UC3 are 1/2 inch diameter x 2-1/4 inches long. For studs that are around 1/2 inch shorter than that you would want the # K12WB169 which is 1/2 inch diameter and 1.70 inches long.
expert reply by: Jameson C
0
Products Referenced in This Question
Kodiak Wheel Bolt - 1/2" Diameter x 1-11/16" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-11/16 Inch Long
- Kodiak
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Similar Expert Q&A Pages
- Will 3,500 lb Dexter Hub/Drum Fit 3,500 lb Axle that Had Oil Bath Setup
- Can Electric Brakes be Added to a 5 by 10 foot Utility Trailer
- Replacement Hydraulic Drum Brake Assembly Recommendation to Replace Rusty Assemblies
- Never Adjust Brake Assemblies for Dexter Trailer Hub 8-247-50UC3 Which Fits 3,500 lb Axles
- Recommended Galvanized Trailer Hub Drum Assembly for 3500 lb Boat Trailer
- What Would Cause Wheel Studs of Dexter Hub 8-247 to Sheer Off
- Brake Assembly for Use with Dexter Galvanized Trailer Hub and Drum # 8-247-50UC3
- Recommendation For Brakes And Drums For WT20GAB Boat Trailer
- Replacement Bearings, Races, Grease Seal and Hub For a 2007 EZ Loader Customs Boat Trailer
- Can Hydraulic Brake Kit AKFBBRK-35-D Mount With Hydraulic Connector on Side
- How to Measure Trailer Hub Drum for Dimensions
- How To Add 10 Inch Surge Brakes To a 2,500 Lb Trailer Axle On a Boat Trailer
- Brakes, Hubs, and 7-Way Plug for Viking Popup Camper
- Triton Trailer Spindle Size Hub is a Dexter 8-247
- How to Pick Out Replacement Hubs for a Boat Trailer
- Dexter Hub 8-248 Bearing and Seal Replacement Recomendations
- Inspecting Hubs, Bearings and Spindles on a Boat Trailer
- Recommended Hub/Drum Assembly for Salt Water Boat Trailer with 3500-lb Axle
- Dexter 8-247-Hub Bearing Buddy and Bearing Kit Fit
- Hub Assembly Recommendation for Ranger Trail Boat Trailer
- Smallest Rim and Tire Combo to Use with the Timbren Axle-Less Trailer Suspension # ASR3500S06
- Replacement Brake Assemblies and Hub/Drums for Dexter 3,500 lb Trailer Axle
- Can a Different Grease Seal Be Used on Dexter Trailer Hub and Drum # 8-247-50UC3
- Are There Galvanized Trailer Hub/Drums for Travel Trailers