If a Torklift SuperHitch Magnum is Installed on a 2016 Ram What Torklift Tie Downs are Recommended  

The camper tie-downs that are designed to fit your 2017 Ram 3500 that I recommend are part #TLD2124 for the front and part #TLR3507 for the rear. These are specifically designed for a 2017 3500 Crew Cab With no running boards or steps and with an…

The rear Torklift tie downs you referenced part #TLF3507A are the set for your 2017 Ram 3500 dually once you swap the factory hitch for the Torklift SuperHitch part #TLD1108-30. Torklift also does not offer these parts separately.

The TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2" #TLD1108 requires no drilling in your frame to install. It will fit in the holes already in your frame using the bolts and plate washers using a fishwire. This…

The difference between the TorkLift SuperHitch Original D1104 that has been discontinued and the part #TLD1108 that replaces it is a slight design change that allows the D1108 to fit the newer 2018 Ram 3500. Either one will still fit your 2015 Ram…

As long as it is properly installed the HappiJac Extender Bracket #HJ54FR won't cause you any issues. Will it add some stress? Of course it will since you're extending the jacks out. However, it won't be enough to result in a problem and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.