Question:
I noticed your reply regarding 2011 Sienna ground height clearnce and that the best was the draw tite class 3 model - would the same apply for 2004 Sienna FWD or close?
asked by: Tommy K
Expert Reply:
For your 2004 Toyota Sienna the Class III trailer hitch that will give you the best ground clearance will be Draw-Tite hitch # 75237. I have linked a video showing an example installation for you.
Once installed either of the above hitches will measure approximately 12 inches from the ground to the top of the receiver opening (or 9-3/4 inches to the bottom of the receiver). There isn't much space on vans!
If you plan on doing some towing I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin and clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
And for trailer wiring I recommend # 118304 to install a 4-Way flat connector to the rear of the vehicle. I have linked a video showing the wiring installation as well.
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"