Choosing a Trailer Rim with Positive Offset to Increase Side Clearance
Question:
Hello, My boat currently has 14x6 rims with 215/75R14 tires. It sits just a bit too wide that I have to squeeze it in my 8 foot garage door. I want to change the rims and tires to give myself a bit of room on each side. I want to change the rims to these AM20304 14x5.5 with the +0.5 offset. I also want to change the tires to 185R14C Ranger R101 Thunderer. I have already tried the tires on my 14x6 rims with a 0 offset, and it got me about a 1/4 inch on each side. There was about 1.5 inches of room on the back side of the tires to the trailer frame. Do you see any problems with changing to these AM20304 rims to get my tires closer to the frame? That would give me even a little more room on each side! Thanks.
asked by: Jamie
Expert Reply:
Narrower tires and rims will certainly help you pick up some side clearance for fitting your boat trailer into your garage. A wheel with positive offset will also help by shifting the wheel's center closer to the trailer frame. Since you have 1-1/2-inches of extra clearance between the tires and trailer frame, 0.5-inch positive offset rim # AM20304 will give you a total of 1-inch additional clearance (1/2-inch on each side).
Be sure to use only special trailer (ST) type tires on your boat trailer (never use passenger tires) and always operate them at the full psi pressure rating noted on the tire sidewall. It is never appropriate to under- or over-inflate a trailer tire. These conditions can cause heat build-up, a tire's worst enemy, which can lead to failure.
Make sure your new tires have a load rating sufficient for the combined weight of your boat and trailer.
Product Page this Question was Asked From
Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black
- Trailer Tires and Wheels
- Wheel Only
- 14 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Shop: Dexstar Steel Mod Trailer Wheel w/+0.5 Offset - 16" x 6" Rim - 8 on 6-1/2 - Silver Sparkle
- Shop: Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - White
- Shop: Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black
- Shop: Grease Seal T51153
- Video: Dexstar Conventional Steel Wheel with Offset Feature Review
- Shop: Replacement Fender Light Housing for Demco Kar Kaddy
- Shop: Replacement Wheel for Demco Kar Kaddy 3 Tow Dolly - White
- Video: Feature Breakdown: Replacement Fender Light Housing for Demco Kar Kaddy
- Q&A: Replacement Wheels and Tires For Demco Kar Kaddy SS Tow Dolly
- Video: Feature Review Dexstar Steel Mod Trailer Wheel w/+0.5 Offset
- Search Results: wheels
- Search Results: demco wheel
- Search Results: dm09296
- Search Results: kar kaddy ss
- Shop: Dexstar Conventional Steel Wheel with Offset - 15" x 6" Rim - 5 on 4-1/2 - Black
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Review of Redline Trailer Wheels - Replacement Drive In Wheel Stud - 7-150
- Video: Trailer Wheel Measurements
- Q&A: Baby Moon With 9-3/8 Inch Diameter Compatibility with Dexstar Conventional Steel Wheels
- Q&A: Does Center Bore of Trailer Wheel Matter When Picking Out Replacement
- Q&A: 14 Inch Diameter Trailer Wheel with 5-on-4-1/2 Inch Bolt Pattern and 2-5/8 Pilot Diameter
- Search Results: wheel bearing seals
- Video: Review of DeeMaxx 2 Inch Wheel Bolt For 13 Inch Integral Hub And Rotor Brake Assembly - DE52GR
- Shop: Trailer Hitch
- Shop: Brake Controller
- Search Results: re67fr
- Search Results: gate hinges
- Q&A: Looking For 1/2" x 20 Wheel Studs With .500" Knurl Diameter
- Q&A: What is the Offset of a Trailer Wheel
- Q&A: How Does the Demco Replacement Hub Part # DM04369 Replace/Install
Bruce H.
5/12/2020
do you have rims with 1.5-2" positive offset