Replacement Brake Assembly Recommendation for a 2006 Fleetwood Mallard Trailer
Question:
Im looking to replace the trailer brakes on a Quality axle trailer. Its a 2006 Fleetwood Mallard. The shoes are 10X2 1/4 and the manual that came with the trailer says replacement shoe part number is BSL10E. The bolts on the back appear to be 2 7/8 apart with four bolts. What brake assemblies will fit?
asked by: Vince C
0
Expert Reply:
Sounds like you have standard 10 inch brake assemblies on your trailer. The part # AKEBRK-35L would work for the left hand side and part # AKEBRK-35R would work for the right hand side.
These are both the same size as what you have and have the same 4 bolt mounting flange.
expert reply by: Jameson C
0
Products Referenced in This Question
Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Bolt Hole Spacing and Center Hole Diameter for etrailer 10x2-1/4 Electric Trailer Brakes
- Are there Specific Electric Drum Brakes for a Boat Trailer with 3,500 Pound Axle
- Replacement Dexter Brake Assemblies for 023-027-00 and 023-026-00
- What Bolt Pattern Mounting Flange is Electric Trailer Brake Assembly # AKEBRK-35L Designed to Fit
- Mounting Hardware for etrailer.com Electric Brake Assembly # AKEBRK-35L
- Can Electric Brakes Be Put on a Boat Trailer
- Which Brake Assembly Does Part Numbers B10E-21 & B10E-22 Correspond to?
- Bolt Pattern that Etrailer Trailer Brake Assembly AKEBRK-35L Attaches To
- How To Replace Brake Assembly And Hubs On 2005 Fleetwood Gear Box ASV Travel Trailer
- What is Needed to Convert a Trailer with Hydraulic Drum Brakes to Electric
- Which Grease to Use for RV Trailer Hubs and How Many Amps Should Be at Trailer Brake Magnets
- Converting Extreme Double Axle Boat Trailer From Hydraulic to Electric Drum Brakes
- What Is Included With Electric Trailer Brake Assembly For 3,500-Lb Axles
- How to Choose the Correct Brake Assembly for Trailer Axles
- Bolt Pattern and Shipping Weight of Trailer Brake Assembly for 3,500 Pound Axles
- Replacement Drum Brakes and Hubs for 3500-lb AL-KO Axles
- Testing the Amperage Draw of Trailer Brake Magnets
- Recommended Electric Brake Assemblies for 10 Inch Hubs
- Troubleshooting Electric Trailer Brakes That Only Work in Reverse
- Replacement Electric Brake Assemblies for Denali Trailer with Tandem 5.2K Lippert Axles
- Installing New Axle and Electric Brakes on an Interstate Loadrunner 6x12 Trailer Without Brakes
- Can Electric Brakes be Used on a Boat Trailer
- How To Remove Stuck Hub/Drum on etrailer 3,500 Lb Axle with Electric Brakes
- Electric Trailer Brake Assemblies to Fit 10x2-1/4 Inch Dexter Drum
- How To Tell The Difference From Right and Left Electric Brake Assemblies
- Guide for Adding Brakes to a Pop Up Camper Axle
- Replacement Parts for Dexter Brakes 10 Inch by 1-1/2 Inch