bing tracking image
Q & A Icon

Parts Needed To Install Brake Controller On 2008 Honda Odyssey

Question:

Hi, I just want to make sure im buying everything i need for my honda 2008 odyssey, I have a primus IQ brake controller, nothing eles, no wire, and need no connect to 7 way round pop up camper trailer connector. I watch a video, and at one point you said there was no enough wire, you connected an extra blue wire, anyway, i just want to order everything i would need... universal kit, t-one etc, im a bit lost! Thanks for your help!

0

Expert Reply:

I will be glad to help you out with that. You have the Primus Brake Controller, part # TK90160 so that is taken care of.

If you have a 4-way connector on your vehicle you will need the Universal Installation Kit for Trailer Brake Controller, part # ETBC7. This will connect to your 4-way connector and with additional wiring give you both a 4-way and a 7-way connector. I have attached a link to an installation video that shows a brake controller and the # ETBC7 controller being installed on a Honda Odyssey.

If you do not have a 4-way connector at the back of your Odyssey, I recommend part # 118438. This is a T-One wiring harness that installs quickly and easily without splicing or cutting into the vehicle wiring.

If extra wire is needed I recommend part # 10-1-1. This is 10-gauge wire that is sold by the foot. If a ring terminal is needed I recommend part # DW05705-1, and for butt connectors that work with 10 or 12 gauge wire I recommend part # 05732-2(2 in each package).

Anytime you are working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the connections and helps prevent corrosion.

expert reply by:
0
Jeffrey L

Products Referenced in This Question







Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>