Recommended High-Capacity Silver-Painted or Zinc Plated A-Frame Trailer Coupler

Question:

Im trying to replace a ram SAW/CSA class IV, 2-5/16inch ball , 14,000 lb gross, 2,100 tongue weight. needs in priority are: 1.0 mounting dimensions including jacking hole location and mounting bolts. 2.0 heaviest design you can recommend. 3.0 zink or silver paint/coating

asked by: Kevin C

Helpful Expert Reply:

It sounds like you're looking for a replacement a-frame coupler like # CA-5280-RB but in a silver-painted or zinc-plated finish. Please click on the link provided to see all bolt-on standard a-frame couplers for 2-5/16-inch balls.

For the highest-rated designs Demco part # DM16680-52 is a 21K-rated bolt-on coupler with a silver powder-coat finish and part # DM13205-95 has a zinc finish. Both fit jacks with a 2-1/4-inch diameter outer tube and have a standard 3-1/4-inch mounting hole spacing. Both fit standard 50-degree a-frame trailers.

I went to our warehouse and measured the 3/8-inch mounting holes' spacing. I prepared a photo for you with these dimensions.

expert reply by: Adam R