Trailer Hitch and Wiring for a 2007 Ford Escape Hybrid
Question:
Will this hitch work on a 07 Escape-Hybrid?
asked by: Tom
0
Expert Reply:
Yes, Draw-Tite trailer hitch # 36501 fits all models of the 2007 Ford Escape including your hybrid. I have linked a video showing an example installation of this hitch for you. I checked the owner's manual online for the 2007 Ford Escape hybrid and found that it has a towing capacity of 1,000 pounds.
If you plan on towing the recommended ball mount is # 36051. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And to add a 4-Way flat trailer connector to the rear of the vehicle you can use # 118426. I have linked a video showing installation of the wiring as well.
expert reply by: Michael H
0
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- Class II
- 3500 lbs GTW
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Hardware Included With Draw-Tite 36501 Class II Trailer Hitch
- Does The Trailer Wiring Harness Come With Draw-Tite Hitch Receiver For 2007 Ford Escape
- Should 2009 Ford Escape Install Transmission Cooler When Towing Small Trailers
- Installation Instructions for a Draw Tite Hitch on a 2011 Ford Escape
- Can Spare Tire be Reinstalled After Installing Draw Tite Hitch on 2009 Ford Escape
- Trailer Hitch and Towing Capacity of a 2007 Ford Escape with 4 Cylinder Motor
- Fastener Kit Needed for the Draw-Tite Trailer Hitch # 36501
- Is Trailer Wiring Included with the # 36501 Hitch for the 2011 Escape Hybrid FWD
- Are Stabilizing Straps Needed for all Class II Hitches on a 2008 Ford Escape or Only the CURT Hitch
- Recommended Trailer Hitch Receiver For 2019 Ford Escape SEL Hybrid
- 1-1/4 inch Trailer Hitch Recommendation for 2009 Ford Escape Hybrid
- Hitch And Cargo Carrier Recommendation For 2010 Ford Escape
- Hitch Comparisons for a 2009 Ford Escape Limited 4wd
- Availability of Replacement Hardware for Draw-Tite Trailer Hitch # 36501
- Will the Draw-Tite # 36501 Receiver Fit with an OEM 1-1/4" Receiver on a 2005 Mazda Tribute
- Friction Sway Control For a 2012 Ford Escape Towing a Trailer
- How to Determine Ball Mount Rise or Drop for 2018 Ford Edge
- Will a Trailer Hitch fro ma Different Vehicle Fit a 2006 Ford Escape
- Trailer Hitch Receiver Adapter - 1-1/4 to 2 for a 2010 escape
- Will Draw-Tite Trailer Hitch for 2005 Ford Escape Also Fit 2008 Ford Escape