Fit of Draw-Tite Class III 75251 Trailer Hitch on 2007 Dodge Dakota

Question

Question:

will these work the same on a 2007 as well. or is there a better one.

asked by: Fernando S

0

Expert Reply:

The Draw-Tite Class III hitch you referenced, part # 75251 would work perfectly on a 2007 Dodge Dakota, it fits 2005-2011 Dakota trucks.

If you'll be using the hitch for towing, you might need the following items to complete your towing set-up.

Trailer wiring harness, part # 118323 (If trailer has more than 1 stop/turn/taillight per side, use a modulate like # C59236)
Ball mount, part # D-4
Hitch Pin and Clip, # PC3
1-7/8 trailer ball, part # 19260 or 2 inch trailer ball, part # 63845
Locking hitch pin, part # e98882

expert reply by: Mike L

0

Answer 1

If you have the factory tow package, you can use part #32145. If you do not have the factory tow package and do not have an existing 4-pole and you want to wire up your vehicle for a brake controller, you will need the T-One Vehicle Wiring Harness…

view full answer...

Answer 2

For your wife's 2005 Dodge Dakota, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part #75251 which is a Class III hitch with a 2" receiver tube opening. As long as you do not have a factory trailer hitch then this option will…

view full answer...

Answer 3

For your 2008 Dodge Dakota I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #75251. It is a confirmed fit for the 2005-2011 model years. The Class III receiver is capable of supporting 500lbs of tongue weight and trailering 5,000lbs with a…

view full answer...

Answer 4

On a 2005 Dodge Dakota the Draw-Tite Class III 2 Inch Hitch, part #75251, will have a 5000 lb towing weight capacity and can be increased with the addition of a weight distribution system. The towing capacity of your Dodge Dakota is listed at 7000…

view full answer...

Answer 5

For a 2006 Dodge Dakota that does not have the factory tow package you will need to hardwire in a trailer brake controller. The first thing you will need is a 4-Way trailer wiring harness, #118323. If the truck already has a 4-Way you will not need…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 12

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Fit of Draw-Tite Class III 75251 Trailer Hitch on 2007 Dodge Dakota

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching