Does the Trailer Wiring Bracket of the 75225 on a 2016 Acura MDX Fit Below Rear Bumper
Question:
I notice on he hitch installed #75226 has an attached bracket for a possible wiring plug in port. The video shows the wiring using #118628. This would have to come out of the rear hatch door and over the bumper. Is there anything that would mount to the hitch bracket under the vehicle that the trial could plug into rather than coming from inside and over the bumper. Thx
asked by: Ray
0
Expert Reply:
Actually the trailer wiring bracket of the Draw Tite hitch part # 75225 that you referenced comes out right under the rear bumper of a 2016 Acura MDX. If you check out the picture I attached I pointed out the bracket with a red arrow and you can see it right under the bumper.
For a bracket to attach to the bracket on the hitch you would want the part # 18144 for use with the # 118628 which is a fit for your 2016 Acura MDX.
click to enlarge
expert reply by: Jameson C
0
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Does Trailer Wiring Harness for 2017 Acura MDX Require Connection to Vehicle Battery
- Is a Relay Required for a Wiring Harness on a 2020 Acura MDX
- Recommended Trailer Wiring Harness for 2018 Acura MDX
- What is Converter Box for On Trailer Wiring Harnesses for 2018 Acura MDX
- Does Battery of 2018 Acura MDX Have to Be Disconnected to Install Trailer Wiring
- 4-Way and 7-Way Trailer Wiring Recommendation for Towing with a 2018 Acura MDX
- Do I Need Relays From the Dealer for the Trailer Wiring to Work on a 2016 Acura MDX
- Do Any Trailer Hitches For 2020 Acura MDX Allow 20 Inch Spare To Be Kept Under Car
- Does T-One 4-Way Wiring Harness for 2019 Acura MDX Support Reverse Light Function
- Recommended Cargo Carrier and Lighting for 2014 Acura MDX
- Trailer Wiring Harness Installation on 2015 Acura MDX
- Recommended 7-Way and Brake Controller for a 2018 Acura MDX
- Can 12 Volt Circuit of Trailer 7-Way Keep Trailer Battery Topped Off
- Will Curt Trailer Hitch Receiver C13146 Fit A 2019 Acura MDX A-Spec
- Alternative to etrailer Trailer Hitch Receiver for 2017 Acura MDX
- Recommendation for Trailer Hitch and Wiring on a 2020 Acura MDX
- Does Installation of etrailer e98840 Hitch Receiver on 2020 MDX Require Any Modifications to Body
- Will etrailer Trailer Hitch Receiver Fit 2017 Acura MDX With Full Size Spare
- Difference Between Curt and etrailer Trailer Hitch Receivers for 2019 Acura MDX
- Trailer Hitch Receiver Compatible With a Compact Spare Tire On a 2019 Acura MDX
- Will Draw-Tite Trailer Hitch Receiver 75225 Fit A 2019 Acura MDX SH-AWD W/ Tech Package?
- Trailer Hitch for 2016 Acura MDX with 19 Inch Spare Tire
- Will Curt C13146 Class III Hitch FIt 2020 Acura MDX With Donut Spare Stowed Under Vehicle
- Is Relay Required to Install Wiring Harness in 2018 Acura MDX
- Trailer Hitch for 2017 Acura MDX SH-AWD
- Adding a 7-Way Trailer Connector and Brake Controller to a 2015 Acura MDX
- Curt or Draw-Tite Trailer Hitch For 2014 Acura MDX For Bike Rack & Trailer Towing
- Installation of Curt Trailer Wiring Harness on a 2018 Acura MDX
- Spare Tire Interference of Curt Class III C13146 Trailer Hitch Installed on 2015 Acura MDX