Will a Titan Aero 7500 Coupler Replace an Aero 6500  

Not all trailer axles have the EZ lube zerk fitting so what you have is totally normal. You can use a Bearing Buddy like you mentioned but we have found is that the Bearing Buddies make it too easy to add too much grease which then blows out the…

We do offer fine thread wheel bolts. I've linked the page to our selection. The one you referenced, #RG02-020, is a 1/2 inch diameter bolt. We also offer bolts that are 9/16 inch diameter and various lengths. You will want to find the bolt that…

The manual Lockout Key #DX94FR works by sliding into the side slide channel on the Brake Actuator #T4500600. The key will prevent the actuator from sliding which will prevent the brakes from being applied when you need to back up with your trailer.

I would be happy to help you. The Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs item #T4500600 you referenced is recommend to be mounted on a 3" wide tongue. It is an industry standard actuator and has an inside…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…