Difference Between EZ Lube Compatible Hubs and Regular Hubs
Question:
Hi - What exactly is meant by Easy-Lube hubs, please? Do the wheel bearings have grease fittings? No grease? Thank you.
asked by: John
Expert Reply:
Some trailers are equipped with EZ Lube spindles, which have a grease fitting or zerk in the end of the spindle, and a small hole in the spindle that lets grease enter the interior of the hub and reach the bearings. This allows grease to be added to the trailer hubs, but the bearings would still need to be inspected and repacked before installation.
The only difference between an EZ Lube hub and a non-EZ Lube Hub would be the grease cap. For an EZ Lube hub, the grease cap would have a removable plug to make the grease fitting easy to access without needing to remove the grease cap.
Having EZ Lube spindles can be handy, but you'll want to avoid overfilling the hub with grease, as it can cause the grease seals in the back of the hub to blow out and allow grease to escape out the back of the hub, and get all over everything. This can also allow water to infiltrate the hub, which can make the remaining grease less effective over time. Using double-lip grease seals make blowing out the seal less likely, but it's still possible if the hub is aggressively overfilled.
If you have standard spindles without the grease fitting, you might be able to use a Bearing Buddy, such as part # BB1980A-SS. In order to provide the correct Bearing Buddy, I'd need to know the outer wheel bearing number of your hub and the hub bore inside diameter.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: pre~greased trailer hubs and drums
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Need To Replace Titan 225 Caliper From Titan 4843100 Disc Brake Kit
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs
- Article: How to Measure a Trailer Axle
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Search Results: trailer axles
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Video: Trailer Hub and Drum Assembly Review
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Video: All About the Trailer Hub and Drum Assembly
- Search Results: lippert jack motor
- Q&A: What Hitch do You Recommend for My Keystone Raptor Toy Hauler?
- Q&A: Replacement Monitor for Furrion Vision S Wireless Camera System
- Q&A: Comparing Dexter and etrailer Branded Electric Trailer Brake Assemblies
- Q&A: Replacement Hub and Rotor Assembly with 5 on 4-1/2 Bolt Pattern for 3,500 Pound Trailer Axle
- Q&A: How to Position Brake Caliper for Trailer Disc Brakes
- Search Results: 1/2 lug nuts
- Search Results: 580 x 12 tire
- Search Results: l68111
- Search Results: timken bearing for dexter 3500 lb axles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Trailer Wiring