Q & A Icon

Will the MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA00-933072 Fit Over Fan-Tastic Vent

Question:

We have a 2016 airtream interstate RV with a fantastic fan and we want to purchase the correct vent cover. We likethe max air two. Can the lid open enough so it will not interfere .

1

Helpful Expert Reply:

The MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA00-933072 is going to work well on your 2016 Airstream Interstate RV that has a Fan-Tastic vent installed on it.

Here is now the vent cover installs:

1.Determine which side of vent to install hinged brackets and install them with included screws.
2.Position the cover in place and mark the positions of the hinged mounting brackets.
3.Drill 3/16" holes in the marked positions, and attach the hinged brackets with included screws.
4.Close MaxxAir II and mark locations of cover's feet on side of vent opposite the hinges.
5.Mark positions of brackets, drill 3/16" holes in the marked positions, and attach the remaining brackets with included screws.
6.Close the cover and install the 2 snap lock pins.
7.Push the snap lock pins down into the lock position.

For installation over high-powered vents, substitute (8) #6 x 1/2" self-tapping screws (sold separately) for the included #8-32 x 1/2" bolts, nuts, lock washers and fender washers.

helpful expert reply by:
1
Jameson C


Video/Article/FAQ this Question was Asked From

Article or Video

Follow up Questions

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>