Can the Trailer Valet XL Trailer Dolly be Used to Push or Pull a Trailer

Question

Question:

Can I use this to pull instead of just push my trailer? For example if I want to pull it 10 feet forward instead of pushing it 10 feet backward.i

asked by: JEFF T

0

Expert Reply:

Yes, the Trailer Valet XL dolly # TVXL2 is actually designed to pull the trailer as well as to push it so it will work just like you want it to! This version has a 2 inch ball. There is also a version with a 2-5/16 inch ball # TVXL25. I have linked a video showing how these dollies work.

expert reply by: Michael H

0

Answer 1

Trailer Valet will officially state that the #TVXL2 should only be used on concrete/asphalt and not on gravel or dirt applications since like you have found out the traction just isn't good enough and the wheel will spin. So while there isn't…

view full answer...

Answer 2

You wouldn't want to try and move a trailer up an incline with the MT70881. The dolly itself would be fine but you would most likely not be able to pull that heavy of a trailer up an incline. And then if you somehow did get it going up the…

view full answer...

Answer 3

I was able to identify your axle thanks to the tag you sent in and Dexter's help and found that the lift kit you'd need would be the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01.

view full answer...

Answer 4

It sounds like you just need to adjust the output and sensitivity setting on the Curt Echo Mobile Trailer Brake Controller part #C51180 as none of what you described indicates a problem is present. The best way to adjust the output and sensitivity…

view full answer...

Answer 5

I do have an option for you but there is no such adapter for the Lock N Roll Articulating Trailer Coupler. That said, there is another Trailer Valet which mounts to the frame therefore can be used with non standard couplers. The Trailer Valet 5X…

view full answer...

Answer 6

Curt has a recommended setup procedure outlined for the Curt Echo part #C51180 that is outlined in their install instructions for this controller but since not all trailer brakes apply the same way there isn't a standard setting you can use that…

view full answer...

Answer 7

In regards to the Curt Echo Mobile Trailer Brake Controller part #C51180, if the blue ring that represent the current brake outlet level is shown partially filled when you first accelerate then you will want to make a quick circle around the block…

view full answer...

Answer 8

There are a few things that can cause the brakes to lock up on a trailer. First, disconnect the trailer from the vehicle. Then use a circuit tester like #PTW2979 if needed to test the connector on the vehicle. Have someone sit in the truck and run…

view full answer...

Answer 9

Since there isn't an adapter for the Lock N Roll articulating couplers you wouldn't be able to use the part #TVRVR9 but you could use the Trailer Valet RVR3 part #TVRVR3 instead which instead attaches to the frame of the trailer. This…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Can the Trailer Valet XL Trailer Dolly be Used to Push or Pull a Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching