Compatibility of Yakima JayLow Kayak Carrier with Rhino Rack Aero Crossbars  

If you check out the picture I attached you will see where I pointed out where the sticker is that has the VIN on the Yakima Rack and Roll trailers like the part #Y08106. If somehow the sticker is worn off or unreadable my contact at Yakima said that…

The cradle measures 11 x 3 inches, the upright arm is 17-1/2 inches tall and the arm is 6-1/2 inches wide. It's constructed of 1 inch tubing with the padded portions being right at 1-1/2 inches in diameter. The arm locks flat, at 90 degrees and…

It sounds like you have a Yakima HullRaiser J-Style Roof Mounted Kayak Carrier Y04039. To be able to mount this kayak carrier on a roof rack with factory or aero crossbars, like the Rhino-Rack Vortex Aero, you will want to use 2 of the HullRaiser to…

There are indeed instructions for the HullRaiser Aero that you can use to install conversion kit #Y8860031. I will send them to you in a separate email. Also I have included a picture showing how the parts all lay out together.

I have good news, more good news, and a third bit of good news! The Yakima HullRaiser conversion kit #Y8860031 will work with the Rhino-Rack aero roof rack bars. It will also work with the Thule Xsporter bars based on other tests we have done with…

The difference between the Thule Hullaport XT part #TH849000 and the Yakima Jaylow part #Y04073 is really pretty subtle as they are mostly the same design just from different brands. I'd recommend going which you like the appearance of the most…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…