What Size are the Wire Studs in the Junction Box Included with Trailer Wiring 7-Way Upgrade Kit
Question:
What size hole will I need for ring terminals?
asked by: Howard
0
Expert Reply:
I went out to the warehouse to measure the studs on the junction box that comes with Trailer Wiring 7-Way Upgrade Kit # e99011. The studs are 3/16 inch. The kit does also include the appropriate size nuts as well as 3/16 and 1/4 ring terminals. I have linked a video showing an example installation for you.
expert reply by: Michael H
0
Product Page this Question was Asked From
etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Trailer Wiring
- Trailer Connectors
- Junction Box
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Parts Needed to Wire Trailer With Electric Brakes
- Parts Needed to Add Wiring for Trailer Lights and Brakes
- What Towing Setup Would Work For My 2012 Mercedes Sprinter
- Does Trailer Breakaway Kit Install After or Before Junction Box
- Replacement Junction Box for etrailer 7-Way Upgrade Junction Box Kit
- Can 7-Way Upgrade Kit w/ Junction Box e99011 be Used on Utility Trailer
- Parts Needed For Wiring Electric Trailer Brakes On a 2018 Tandem Axle Trailer
- Wiring Kit to Convert Trailer Wiring to 7-Way Format
- Replacing a Trailers 6-Way Connector with a 7-Way Connector
- How To Wire and Install On-Board Auxiliary Trailer Battery to Power Lights
- Upgrading 4-Way of Trailer to 7-Way to Wire Battery for Powering Trailer Interior/Exterior Lights
- Recommended Trailer Plug for Starcraft Truck Bed Camper
- Does Junction Box 7-Way Kit # e99011 Have Dodge Ram Trailer Wiring Color Code
- How To Hook Up Two Pin Brake Plug on Jayco Trailer
- Which Axle if only one Should Have Trailer Brakes on Tandem Axle Trailer
- Parts Needed to Totally Rewire Trailer
- How Do I Change From Surge Hydraulic Brakes To Standard Electric Brakes?
- How to Wire a Car Dolly for Electric Brakes
- Replacing a 7-Blade to 6-Square Trailer Adapter on a Pop Up Trailer
- Does the Brake Output Wire Get Attached to a 12 Volt Trailer Battery
- Wiring Diagram for Installing etrailer Junction Box Upgrade to Utility Wiring Colors
- Re-Wiring Trailer for Tail Lights and Electric Brakes
- Troubleshooting New Trailer Brakes that Dont Engage with Multiple Trucks
- Is There a Junction Box and 7 Way Connector Available With a Coiled 7 Way Instead of Straight
- Parts Needed to Add Brakes to a Trailer with 3,500 lb Axle and 5 on 5 inch Bolt Pattern
- Trailers Right Blinker Light Causes Both Lights to Blink
- Why Do 4 to 7-Way Trailer Connector Adapters Have Missing Pins Inside the 7-Way Plug