Trailer Brake Assemblies to Replace Axletek B10E-02
Question:
I have Axletek B10E-02 assemblies on my trailer please advise which replacement assemblies that you carry would fit this application.
asked by: Darrell W
0
Expert Reply:
I was able to find info on the part number you listed and you have 10 inch by 2-1/4 inch brake assemblies that are for a 3,500 lb axle.
The part # AKEBRK-35R is the correct right hand side assembly for a replacement. For the left hand side you would want the part # AKEBRK-35L. I attached an install video for these for you to check out as well.
expert reply by: Jameson C
0
Products Referenced in This Question
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Recommended Brakes for a 2018 Forest River Flagstaff Hard Side Camper T21QBHW
- Does Actuator have to be Removed when Switching Trailer from Hydraulic to Electric Brakes
- Brake Pad Height of etrailer 10 inch Brake Assemblies AKEBRK-35R
- Can Drums from a Trailer with 10 Inch Hydraulic Brakes be Re-Used When Converting to Electric Brakes
- Will etrailer Electric Trailer Brakes Fit in Place of Dexter Brakes on a 3,500 Pound Axle
- Information Needed for Brake Assembly AKEBRK-35R to Fit Trailer
- Replacement Magnets for Trailer Electric Drum Brakes
- Will Having Brakes On Both Trailer Axles Cause Brakes to Lock Up if Applied When Trailer is Unloaded
- How to Find the Correct Size Brake Assemblies to Fit the Axle
- Brake Mounting Flange Recommendation for Dexter 3,500 lb Axle
- How to Pick Out Brake Assemblies for a 2008 Starcraft 21SB
- Needing Brakes, Hubs, Bearings and Seals for a set of AL-KO Axles with 10 X 2-1/4 Inch Brakes
- Picking Out Replacement Brake Assemblies for 2006 Fleetwood Niagara
- Replacement Electric Trailer Brakes for 1998 Coleman Fleetwood Sunridge Pop-Up Camper
- Trailer Brakes Do Not Lock Up and Show Low Voltage, What is the Right Voltage
- Selecting Replacement Electric Trailer Brakes and Mounting Harwdware
- Electric Brake Assemblies for 2020 Forest River Wildwood FSX with 10 inch Drums
- How to Determine the Correct Replacement Trailer Drum Brake Shoes
- Will etrailer Brake Assembly # AKEBRK-35R Replace Dexter 023-027-00
- One Electric Trailer Brake Assembly Does Not Release After Applying Brakes
- Correct etrailer Left Side Brake Assembly To Replace Dexter Part Number 23-26
- Installation of Brake Hub Drum Assemblies Over Brake Assemblies
- Can Boat Trailers Use Electric Drum Brakes
- Wheel Sizes Compatible with AxleTek 3500-lb Trailer Brakes AKEBRK-35L & AKEBRK-35R
- How to Pick out Replacement Hubs and Brake Assemblies for a Travel Trailer
- What is Difference Between etrailer Brake Assemblies AKEBRK-35R-SA and AKEBRK-35R
- How to Pick Out Brake Assembly for 5th Wheel Trailer
- Replacement Electric Drum Brake Assembly for 3,500 Pound Trailer Axle
- How to Pick Out Electric Brake Assemblies to Replace Hydraulic on Trailer
- What Measurements are Needed to Pick Out Trailer Axle