Who Can Replace Trailer Axle Spindle
Question:
How do I install the spindle. do they have to be welded on the axle.
asked by: Les W
0
Expert Reply:
Trailer spindles should only be installed by a qualified fabricator with trailer axle experience who has the necessary equipment to square up a trailer spindle. It's not a project for someone who's pretty good at welding since if the spindle is off by just a little bit you will have all sorts of alignment issues.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT6SE Review
- Search Results: boat trailer wiring kit
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Video: Review of TruRyde Trailer Spindles - Replacement 42 EZ Lube Spindle - TRU37FR
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Video: Review of etrailer by AxleTek Trailer Axles - 6,000 lbs 95 Inch Axle w/ Electric Brakes - e35SR
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 95" Long - 6,000 lbs
- Q&A: Do Hangers Need to be Exact Match to Use APT6SE Kit
- Search Results: fender marker lights
- Search Results: 12 gauge wire
- Search Results: brake wire
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 95" Long - 5,200 lbs
- Q&A: How to Wire Second Axle of Trailer for Brakes
- Search Results: trailer wiring kit
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs
- Article: Trailer Wiring Diagrams
- Search Results: trailer bearings
- Video: Trailer Wiring Harness Installation
- Video: Bearing Repacking and Grease Seals Installation
- Video: Dexter Axle Trailer Brakes - Electric Drum Brakes - 23-468-469 Review
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Q&A: Correct Replacement Spindle for Axle with 25580 and LM67048 Bearing
- Q&A: Recommended 8,000 lb Slipper Spring Hanger and Equalizer Kit for 2 Inch Springs
- Q&A: Replacement Trailer Spindle for 3 inch Diameter Trailer Axle
- Q&A: Dimensions of Trailer Spindle TRU37FR
- Q&A: Will Spindle # TRU37FR for Trailer Allow Use of Standard Hubs and Brake Assemblies
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Search Results: hub
- Article: Double-Eye Trailer Suspension System Review