Solution for Allowing Husky Weight Distribution System that Needs 4 inch More Drop to Tow Level
Question:
I have a underslung tongue on my camper. I can only go down to the last hole on the shank and I am still 4 in. higher than the tongue. Husky says that over slung or underslung I should set it up the same. Would this matter in your opinion? I have watched your video but your camper is a over slung . Can you give me any insight here. Your help is appreciated . Thanks
asked by: Ricky S
0
Expert Reply:
Sounds like your weight distribution system just doesn't have enough drop capabilities to allow your trailer to be towed level. If you have the part # HT32218 and need a shank that can do about 4 inches more drop you would want the part # C17123 would be a great choice for you.
expert reply by: Jameson C
0
Products Referenced in This Question
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 8-1/2 In Drop
- Trunnion - 8-1/4 In Drop
- Round - 12-3/4 In Rise
- Trunnion - 11-1/2 In Rise
- CURT
more information >
Video/Article/FAQ this Question was Asked From
Article or VideoSimilar Expert Q&A Pages
- Can Weight Distribution Shank Be Changed for Longer One
- Husky Weight Distribution System for Travel Trailer with 775-lb Dry Hitch Weight
- What is the Tongue Weight Compatibility of the Husky Center Line HT32218 Weight Distribution System
- Drop Shank Recommendation for Husky Centerline Weight Distribution that Fits 2.5 inch Hitch
- Weight Distribution Recommendation for Trailer with 900 lb Tongue Weight
- Does the Husky Center Line Weight Distribution System Have 4-Point Sway Control
- Recommended Clamp-On Weight Distribution System for 9K Trailer with 2.5 Shank
- Drop Shank Options for Husky Centerline Weight Distribution System
- Which is Better for Ball Mount Height, .5 inch Too High or .5 inch Too Low
- Which Way to Spring Bars Go on a Weight Distribution System to Apply More Spring Tension
- Comparing Equal-i-Zer and Husky Centerline Weight Distribution Systems
- Comparing the Husky Centerline TS To The Equal-i-zer Weight Distribution System
- Using Weight Distribution System on Big Tex Trailer Tongue
- How to Adjust Weight Distribution Spring Bar Tension
- Comparison of Husky Center Line TS Husky Center Line HD and Equal-I-zer Weight Distribution Systems
- Head of Husky Center Line Weight Distribution System Hitting Trailer Frame with Washers Installed
- Weight Distribution System for 7,000 lb Trailer with Pole Tongue
- Recommended Lubricant for Noisy Weight Distribution System
- What Bolts of Husky Weight Distribution Head get Greased
- Adjusting Head Of Husky Center Line Weight Distribution Hitch To Level Spring Bars
- Is Husky Weight Distribution System Similar to Equalizer 4 Point Weight Distribution
- Hitch Ball Angle of Weight Distribution System and Head Adjustment Options
- Husky Centerline Weight Distribution Installation
- What Is the Tongue Weight Capacity for a 2008 Chevrolet Silverado 1500
- Weight Distribution Recommendation for Trailer with 600 lb Unloaded Tongue Weight
- Recommended Weight Distribution System With Sway Control for Trailer with Max 1,200 Lb Tongue
- Can the Husky Center Line 1,200 Lb Spring Bars Be Swapped Out for the 800 Lb Spring Bars
- Does the Husky Center Line Weight Distribution System Come With a 2-1/2 Inch Shank
- Adjusting Husky Center Line Weight Distribution System For More Level Ride And Sway Control
- Will Adjusting Husky Weight Distribution Head Angle Down Put More Weight on Truck Front Axle