Replacement Oil Cap for Dexter Hub # 21-35
Question:
Is the Kodiak Cap # KPCAP a replacement oil cap for a Dexter 21-35?
asked by: JEREMY
0
Expert Reply:
The Kodiak Oil Cap # KPCAP you are looking at is a replacement cap for the Kodiak Pro Lube Kit. The oil cap you need is the Redline Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles # RG04-230. This will replace the oil cap on your trailer axles with Dexter 8-bolt hubs.
I attached a review video of this oil cap you may want to check out.
expert reply by: Sarah H
0
Product Page this Question was Asked From
Replacement Grease Cap for Kodiak 7,000-lb, 7,200-lb, and 8,000-lb Disc Brake Kits
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 2.875 Inch I.D.
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Oil Seals and Outer Cap To Change From Grease Axle Bearing To Oil
- Replacement Plug Recommendation for Replacement Grease Cap # KPCAP
- Availability of Trailer Hub Cap for Mastercraft Boat Trailer that is Threaded
- Difference Between the Oil Bath Caps # XL-PLCAP and # KPCAP
- Installation Torque Value for Kodiak Replacement Grease Cap KPCAP
- How Much Torque is Applied to a Kodiak Grease Cap for Installation
- What Size Socket is Needed to Tighten the Kodiak XL ProLube Oil Bath Cap # KPCAP
- Filling a Kodiak Oil Bath Disc Brake Hub and Oil Compatibility
- Replacement Oil Bath Cover for Trailer Hub
- Parts Needed To Convert 5TH Wheel With Tandem 7K Axles To Disc Brakes and 17-1/2" Wheels Oil Lubed
- Does The Kodiak Disc Brake Kit K2HR858DE Use Grease Or Oil To Lube The Hub Bearings?
- Replacement Plastic Cap and Seal for 8K EZ Lube Axle
- Parts Needed To Add Electric Over Hydraulic Disc Brakes On Tandem Axle Trailer With Lippert 8k Axles
- Is There a Bearing Buddy for a Hub Bore with 2.25 Inch Diameter
- Disc Brake Kit Compatible With Lippert 8,000 Torsion Axles
- What Is the Hub Bore of the Kodiak 13" 8K Disc Brake Kit