Availability of High Capacity Extra Long Ball Mount Compatible With 2-5/16 Inch Trailer Ball  

The Gen-Y Hitch Hitch Extender #GY89SR is far superior to the Curt Hitch Extender #C45795. The Gen-Y is made in the USA, comes with a lifetime warranty and as you pointed out has the higher 10,000lb trailer capacity with up to 500lbs of tongue…

The Brophy Ball Mount #BM20 and the Brophy #BH20 referenced in your question are extremely similar to each other. They are both designed for 2 inch trailer hitch receivers, have a 10,000 pound towing weight capacity, feature a long, 13-1/4 inch shank…

Adding a hitch extender to your setup does reduce the tongue weight and towing capacity by 50% so we would need to find an extender that's rated around the 10,000lb range to be safe. You'll also need to take into account the size of your…

Typically the ball mounts that are longer or have large drops/rises have lower capacities than ones that are more standard in dimensions. This is designed to help take care of the capacity reduction question you mentioned since there isn't a hard…

Yes, there is. It is the Gen-Y Hitch Hitch Extender for 2" Trailer Hitches item #GY89SR which is actually 14" long. This fits a 2" receiver, has a 500 lbs tongue weight, and a 10,000 lbs maximum towing capacity. This extender, like all…

I would be happy to help you. Our longest ball mount is going to be 15-3/4" long and it is the Hidden Hitch Ball Mount item #80232. This ball mount has a 6,000 lbs capacity so it will definitely be able to handle your boat trailer. For a 2"…

I have a possible solution, but none of the 14-16" extensions have a high enough capacity. The only thing that comes close is the Gen-Y #GY89SR which has a gross towing weight of 10,000 lbs, but the max tongue weight is only 500 lbs. This would…

I have a solution for you, however, the Blue Ox Hitch Extender #BX88264 is is designed for hitch-mounted accessories or for flat towing only, not to tow a trailer. Your best option is to use an extra long weight distribution shank, like the Curt…

For your 2018 Ram 3500 with a factory 2-1/2 inch hitch the Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long #C45048 would be what i recommend. It can give you either a 24 inch or 34 inch long extension and…

A weight distribution system is a product designed to provide support to the towing vehicle by using spring bar tension to redistribute some of the trailer's tongue weight up to the front axle of the tow vehicle. There's a link down below…

You might not need a hitch extender. It is possible that a long ball mount will have the length needed to provide clearance for towing the trailer. Ball mount #BM20 measures 13-1/4' inches from the center of the pin hole to the center of the ball…

Blue Ox hitch-mount tow bars such as their Alpha #BX7380 and Avail #BX7420 can be used with a hitch extension up to 12-inches in length, part #BX88264, but Blue Ox cautions against longer hitch extensions. The potential risk is damage to the hitch…