Ball Mount with Pintle Attachment, 2 Inch Ball, and 2-5/16 Inch Ball  

The distance from the center of the hitch pin hole to the closest cradle is around 40" tall whereas the distance from the center of the hitch pin hole to the furthest cradle is around 42" tall. Please note the 3 Bike Hitch Mount Folding…

For the Reese Weight Distribution Shank, part #RP3214, the overall length of the vertical shaft is 8-3/4", and the top of the horizontal shaft to the bottom of the vertical one is 7-1/2". I've linked to a video review of this shank for…

Ball Mount Adapter #BA-1 and Clevis Adapter #CA-1 from Convert-A-Ball both fit perfectly on the Reese Weight Distribution Shank #RP3215. I went to our warehouse and fitted the two adapters on the shank and their 3/4-inch hole diameter and 1-1/4-inch…

According to Convert-A-Ball, the distance between the tangs on the #CA-1 is 2-3/4". In the video they took a quick measurement with a ruler which is why he says "about 2-5/8" so I apologize for any confusion that may have caused.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…