Replacement Oil Seal Recommendation for Dexter Hub Part # 8-285-10UC3-A
Question:
Hello I am in search of the oil seal number for the dexter 8,000 lb axle drum part # 8-285-10UC3-A thanks
asked by: Robert A
0
Expert Reply:
The correct oil seal for Dexter Hub Part # 8-285-10UC3-A is the part # 10-63.
I attached a review video for this as well.
expert reply by:
Jameson C
0
Products Referenced in This Question
Unitized Oil Seal for Trailer Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 8,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 25580
- 02475
- For 8000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Trailer Hub/Drum for Part Number 2420801
- Q&A: Replacement Hub/Drum for Lippert 8k Hub 2420801
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Hub For Outer Bearing LM11949 & Inner Bearing LM67048
- Q&A: Recommended Replacement for Tie Down Engineering (TDE) Brake Actuator 48980
- Q&A: Replacement Surge Brake Actuator for a Tie Down Engineering LP80 For Disc Brakes
- Q&A: How to Identify S8SL Trailer Coupling Prep on 2024 BMW X7
- Q&A: Dexter Brake Assembly Recommendations to Replace Part Number 023-357-00
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Don't Break Your Pipes or Your Wallet: Winterize and De-Winterize Your RV
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub