Does Erickson Ladder Rack # EM07705 Fit 2008 Nissan Frontier with Utili-Track

Question

Question:

How are the Erickson Ladder Racks tool box compatable with the J hook system? 2008 Nissan Frontier Xtra-Cab Thanks

asked by: Alan K

0

Expert Reply:

We checked with Erickson and they have confirmed the fit of the Erickson Ladder Rack part # EM07705 on your 2008 Nissan Frontier that has the Utili Track System. The j-hooks would fit between the track of the truck bed and the bed rail.

expert reply by: Jameson C

0

Answer 1

Yes, the Erickson Ladder Rack part #EM07705 that you referenced is a confirmed fit for your 2000 Nissan Frontier whether it has a 5 or 6 foot bed and would work well.

view full answer...

Answer 2

I have a solution for you, but the Erickson Truck Bed Ladder Rack #EM07708 does not have any way to support an awning since there are no crossbars. You would need to install a ladder rack that provides crossbars preferably with a t-slot channel on…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the #Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 9

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 10

Hey Mike, The RetraxPRO MX Hard Tonneau Cover #RT80233 doesn't have a t-slot and the rails would cover the bedrails of the truck so it would not be compatible with a Yakima roof rack. You would need the RetraxPRO XR Hard Tonneau Cover #RTT-80233…

view full answer...

Answer 11

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR #TH43002XT-508…

view full answer...

Answer 12

Hey Peter, There unfortunately are no type of extensions for the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. There are just spacers for it so the crossbars sit up higher from the Retrax XR…

view full answer...

Does Erickson Ladder Rack # EM07705 Fit 2008 Nissan Frontier with Utili-Track

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching