Bow and Stern Tie-Down Connection Points on a 2017 Subaru Outback Wagon  

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There are really two main types of trailer hitches for a 2019 Subaru Outback, visible like the etrailer Trailer Hitch Receiver part #e98847 and hidden like the etrailer Trailer Hitch Receiver part #e42TR. The visible hitch means you can see the cross…

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

Excellent question Kate. The Curt Trailer Hitch Receiver #C13410 is going to require the following tools recommended by Curt. This information is also shown in the instructions linked near the bottom of this page if you wish to see what all steps are…

Don't worry Dave, we have everything you need. The Malone LowBed MicroSport Trailer #MPG464-LB will allow you to carry boats up to 20' long and can support up to 500lbs on the crossbars. So with the Bunk Kit #MPG561 and 2 Bike Racks #MPG2100…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The information I have says the #306-X7162 has a ground clearance measurement of 10-1/2". The Curt #C13410 has approximately 12" to 12-1/2" of clearance when measured to the bottom of the receiver. I'm not 100% sure how accurate…

Both the Curt Trailer Hitch Receiver #C67JR and the Draw-Tite Max-Frame Trailer Hitch Receiver #DT73RR are perfectly compatible with the rear bumper under guard you are describing. These are two very different hitches. The #DT73RR installs by bolting…