Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer

Question

Question:

I have the larger outer bearing race L68110 and the seal I removed was about 1/2 inch thick I see this seal is an NGK AD2527E but I am having a hard time locating one. Is there a new replacement seal its a 3500 Lbs trailer boat mate about 20 years old. inner bearing is the L68149 I believe.

asked by: Paul

1

Helpful Expert Reply:

To replace your NOK AD2527E seal you can use # 168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches. So it will be a tight fit but no other seal is even close.

expert reply by: Michael H

1

Answer 1

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 2

The correct replacement grease seal for the AD2527E you listed is the part #168233.

view full answer...

Answer 3

Based on my research the hub 46210 is an idler hub for a 3500-lb axle. Since I do not know which hub bolt pattern you need I have linked our main page that displays all hubs for 3500-lb axles. You need to match up your wheel bolt pattern (please…

view full answer...

Answer 4

The closest option we have that would work is the part #010-180-00 which has an inner diameter of 1.68 inches and an outer diameter of 2.33 inches.

view full answer...

Answer 5

The Demco Hydraulic Brake Actuator part #DM72VR is a great option to replace an Atwood 82543. That said, it does not come with any sort of reverse lockout feature therefore in order to reverse without the brakes locking up you will either need to add…

view full answer...

Answer 6

I believe you meant a TDE 46245, is that correct? If that's the case, you've got a 3500 lb axle which uses a 10 inch hub/rotor with a 5 on 4-1/2 wheel bolt pattern. You'll want to use the Kodiak #KHR10D hub/rotor as a replacement. The hub…

view full answer...

Answer 7

The Grease Seal part #168233 has a double lip so it can be used on a boat trailer and be submersed under water, yes. This is also the correct replacement for the NOK AD2527E Grease Seal that you have now.

view full answer...

Answer 8

We're not sure what the O stands for, in anything, but to make sure this bearing seal works for you you can take a few quick measurements. You will need to measure the outside diameter of your existing seal, or the inside diameter of the mounting…

view full answer...

Answer 9

It sounds like you have free backing braking assemblies on your trailer so a lockout at the trailer coupler is not needed. In order to replace the Atwood Surge Brake Actuator 82541, I recommend using the Titan Leverlock Brake Actuator part…

view full answer...

Answer 10

The Replacement Master Cylinder Assembly #T4395100 will not work to replace your Atwood master cylinder model 85841. Since replacement parts for your actuator are obsolete, your only option is to replace the entire actuator assembly. The Demco…

view full answer...

Answer 11

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 12

I checked with Aluma and they list a 14" Liger Wheel and Tire 60-0001396 as a replacement 14" wheel for their trailers but they do not specify the finish. We do have one 14" Liger Wheel item #LH84FR. It is gunmetal gray and has a 5 on…

view full answer...

Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching