How Much Clearance Between SumoSprings # SSR-610-40 and Frame on an Unloaded 2015 Toyota Tundra

Question

Question:

What would be the clearance when truck unloaded between the frame and the superspring I will have on my 2015 tundra crewmax if I go by the SSR-610-40? Thanks

asked by: Julio G

0

Expert Reply:

It's going to vary some from vehicle to vehicle just because of how your truck rides. However, I reached out to SuperSprings and they told me that a half inch to an inch of clearance between the spring and the frame is fairly standard. The SumoSprings Solo Custom Helper Springs # SSR-610-40 including the brackets are 6 inches tall. So if you need to determine exactly how much space will be between the spring and the frame of your Tundra you can always measure.

expert reply by: Charles S

0

Answer 1

According to the folks at SuperSprings, there should be a 1/2 to 1-1/2 inches of preload on an unloaded vehicle, so its likely that the suspension on your truck has worn to a small degree over the years. SuperSprings tells me that if the unloaded…

view full answer...

Answer 2

The Timbren Rear Suspension Enhancement System #TTORTUN4 is a great SES that fits your 2018 Toyota Tundra. The Timbren line of SES is really popular and there are several models available. The #TTORTUN4 features heavy duty rubber springs with a 6,000…

view full answer...

Answer 3

Timbren's actually have the reputation as providing the harshest ride quality of all of the suspension enhancement kits so that would not be my first choice. Instead I would recommend the RoadActive Suspension kit part #RAS34FR which will give…

view full answer...

Answer 4

I went out and pulled both the Timbren kit part #TTORTUN4 and #TTORTUN4L from our warehouse to measure them for you and found that they both sit exactly 3-3/4 inches tall.

view full answer...

Answer 5

The Timbren Active Off-Road Bumpstops #TABSOSR referenced in your question feature an assembled height of 4-5/8 inches. I have attached a short video review on this kit along with the written installation instructions that you can check out as well.

view full answer...

Answer 6

For your 2018 Toyota Tundra the suspension enhancement I recommend is the Timbren kit part #TABSOSR because this kit installs easily, gives you the suspension support you need to greatly reduce the sag, and because it doesn't require monitoring…

view full answer...

Answer 7

I'd go with the lighter duty SumoSprings for your 2017 Toyota Tundra for the reason you mentioned. The heavier duty ones will be much harsher. I only recommend the higher duty ones for people who plan to be at the capacity of their vehicle most…

view full answer...

Answer 8

Even though the Super Springs SumoSprings #SSR-610-40 will help to keep your 2016 Toyota Tacoma level while towing like a weight distribution system, they are meant to keep your Tacoma from experiencing too much wear and tear while under a load. They…

view full answer...

Answer 9

From the weight capacities you listed, I suggest going with the SumoSprings #SSR-610-40. This will give you the needed support while not affecting the ride as much as a higher capacity option. I do have to mention, however, that all the suspension…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

In regards to the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs part #F2709 and Air Lift LoadLifter 7500 XL Air Helper Springs part #AL57541 which are fits for a 2021 GMC Sierra 3500, the main difference is bag construction although…

view full answer...

Answer 12

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

view full answer...

How Much Clearance Between SumoSprings # SSR-610-40 and Frame on an Unloaded 2015 Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching