Can Shelby Snap Ring Jack Mount Accept Fulton Round Snap-Ring Swivel Marine Jack FTJ120W0301  

According to our research the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will fit as a replacement for your Shelby 5756 boat trailer jack. It will allow you to keep the same bracket that is currently welded-on. You basically need to open…

What we have heard is that the Fulton #FTJ120W0301 does fit the mounting plate of the Shelby Jack 5784 which is what it looks like you have something similar to.

You can grab the Replacement Cable Lock Assembly #Y8890202 and the replacement should be the same as the original. If you got the cable and for some reason it doesn't have the right locking core,. then you can go ahead and get another locking…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…