Recommended Brake Assemblies For 8,000-Lb Hayes Axle On Ditch Witch Trailer
Question:
I have 8000 lb. Hayes Axles on an older Ditch Witch trailer. Is this enough info to suggest a brake assembly number for replacement?
asked by: Marty C
0
Expert Reply:
The electric brakes I recommend for your 8,000-lb axles are the AxleTek, part # AKEBRK-8R for the right hand(passenger side) of the trailer and part # AKEBRK-8L for the left hand(driver side). These are self-adjusting brakes and also have covers for the adjuster holes to help keep dirt and debris out of the brake assemblies.
If you are looking for disc brakes I recommend Kodiak, part # K2HR89DE. These have a 13-inch hub/rotor and an 8 on 6-1/2 bolt pattern. Bearings and the seal are sold separately. You would need part # 25580 for the inner bearing, part # 02475 for the outer bearing, and for a seal you would need part # RG06-070.
click to enlarge
expert reply by: Jeffrey L
0
Products Referenced in This Question
Replacement Trailer Hub Bearing - 02475
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 02475
- Race 02420
- 8000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- 10000 lbs Axle
- etrailer
more information >
Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 8,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- etrailer
more information >
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8,000-lb Dexter
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 8000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand - 8,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement Self-Adjusting 8K Brake Assemblies for Dexter Axle
- Compatibility of Electric Trailer Brake with Dust Shield With Dexter 8-285 Hubs
- Hub and Drum Replacement for Trailer with 8k Axles and 8 on 6.5 inch Bolt Pattern
- Dexter Parts Interchangeable with 8,000 Pound Electric Trailer Brake Assemblies
- Trailer Brakes for 12 Inch Hub and Drum
- Replacement Self Adjusting Brake Assemblies for Lippert 8,000 lb Axles
- Choosing the Correct Replacement Electric Brakes for 8,000 lb Axle
- Recommended Brake Assembly for 1991 Sundowner
- Replacement Brake Assemblies for Dexter 8-285 Oil Bath Hub and Drum for 8,000 Pound Axle
- Replacement Electric Trailer Brake Assemblies for 8,000 Pound Axles
- Recommended Brake Assemblies and Hubs with Oil Bath For Dexter 8,000 lb Axles
- Picking Out Brake Assemblies for 2005 Cedar Creek 36RLS
- Replacement Brake Assemblies and Hubs for 2008 Double Tree 5th Wheel Trailer