Suspension Enhancement Recommendation for a 2014 Honda Pilot

Question

Question:

Do you have any airbag systems for a 2014 Honda Pilot that will help reduce sagging from a trailer? Thanks!

asked by: Justin M

0

Expert Reply:

For your 2014 Honda Pilot we do have suspension enhancement I can recommend. But we do not have any air setups. What you would want is the Timbren kit part # THROD2 which is a confirmed fit for your vehicle. The added benefit to this kit is that it does not require you to ever mess with inflating bags or maintaining air pressure.

It's very much a set it and forget it type setup.

expert reply by: Jameson C

0

Answer 1

Hey Brian, thanks for reaching out! Your 2012 Honda Pilot has a unibody frame and according to page 544 of your owner's manual Honda doesn't recommend you use on either. Since this is the case, I recommend installing the Timbren Rear…

view full answer...

Answer 2

Choosing a ball mount with the proper rise or drop is not an exact science. I typically recommend allowing for 1 to 2 inches for sag once the trailer is coupled. This figure can increase of decrease depending on the trailer tongue weight and the…

view full answer...

Answer 3

When choosing a weight distribution system, you will want to select one that encompasses the tongue weight of the trailer when fully loaded. This weight is usually between 10 to 15 percent of the GTW weight. You could also use the Reese system…

view full answer...

Answer 4

You will be able to back up with the Reese Pro Round Bar Weight Distribution item #RE34FR set up. It may be a lot easier to remove the springbars from the weight distribution system first but it isn't necessary. You won't have any issues with…

view full answer...

Answer 5

The Reese Pro Round Bar Weight Distribution part #RE34FR only comes with a 2-5/16" hitch ball but you can purchase a 2" and swap it out yourself using the 2" Hitch Ball part #A-90. If you don't have the tools to swap it out just…

view full answer...

Answer 6

Generally, switching to a weight distribution hitch with anti-sway built in is going to provide a much better towing experience; you're also going to find that these combined systems like the Fastway E2 #FA94-00-0600 will allow you to backup…

view full answer...

Answer 7

Pertaining to the Reese Pro Round Bar Weight Distribution Hitch #RE34FR, the head itself without a ball is about 20 lbs. The shank is about 25 lbs. The ball itself would be 3 lbs. Each spring bar is about 12 lbs apiece.

view full answer...

Answer 8

There isn't a left and a right. The unit is set up for the right side of the trailer, when adding a second, you'll turn the lever to the 'off' position, loosen the adjustment bolt and slide out and flip the slide bar so the socket is…

view full answer...

Answer 9

Yes, the Reese Friction Sway Control Kit #83660 can be used with the Reese Pro Round Bar Weight Distribution #RE34FR. You may need to move the brackets back on the weight distribution hitch to get the ball for the sway control at its 24" center…

view full answer...

Answer 10

Your camper is not too light for a weight distribution system and the Reese Pro Round Bar Weight Distribution item #RE34FR will work on your trailer. This system works with trailer's that have a tongue weight between 200 lbs and 600 lbs. The…

view full answer...

Answer 11

The Reese Weight Distribution System w Shank - Round Bar part #RE34FR does not utilize friction sway control. It is simply a weight distribution system that will redistribute the weight of your setup with the spring bars which will help to reduce…

view full answer...

Answer 12

Since you are towing with a 2015 Toyota Sienna I strongly recommended using a weight distribution system. Weight distribution systems should be used when the trailer being towed weighs 50% or more of the vehicles weight. It looks like your 2014 Jayco…

view full answer...

Suspension Enhancement Recommendation for a 2014 Honda Pilot

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching