10 x 2-1/4 Inch Electric Drum Brakes for a 2013 Keystone Springdale 303 Travel Trailer
Question:
I have a 2013 Keystone Springdale 303 travel trailer. I have six lug leaf spring axles, but have a 10inch x 2 1/4inch brake assembly. Which brake assembly do i need. I would like to replace all 4 assemblies.
asked by: Bill
0
Expert Reply:
There are some 10 inch hub/drum assemblies that take 10 inch brakes so it isn't uncommon. Your existing brakes should have the 4 bolt mounting pattern so you can use brake assembly # AKEBRK-35L for the left and # AKEBRK-35R for the right. I have linked a couple of videos on these brakes for you.
expert reply by: Michael H
0
Products Referenced in This Question
Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Bolt Hole Spacing and Center Hole Diameter for etrailer 10x2-1/4 Electric Trailer Brakes
- Are there Specific Electric Drum Brakes for a Boat Trailer with 3,500 Pound Axle
- Replacement Dexter Brake Assemblies for 023-027-00 and 023-026-00
- What Bolt Pattern Mounting Flange is Electric Trailer Brake Assembly # AKEBRK-35L Designed to Fit
- Mounting Hardware for etrailer.com Electric Brake Assembly # AKEBRK-35L
- Can Electric Brakes Be Put on a Boat Trailer
- Which Brake Assembly Does Part Numbers B10E-21 & B10E-22 Correspond to?
- Bolt Pattern that Etrailer Trailer Brake Assembly AKEBRK-35L Attaches To
- How To Replace Brake Assembly And Hubs On 2005 Fleetwood Gear Box ASV Travel Trailer
- What is Needed to Convert a Trailer with Hydraulic Drum Brakes to Electric
- Which Grease to Use for RV Trailer Hubs and How Many Amps Should Be at Trailer Brake Magnets
- Converting Extreme Double Axle Boat Trailer From Hydraulic to Electric Drum Brakes
- What Is Included With Electric Trailer Brake Assembly For 3,500-Lb Axles
- How to Choose the Correct Brake Assembly for Trailer Axles
- Bolt Pattern and Shipping Weight of Trailer Brake Assembly for 3,500 Pound Axles
- Replacement Drum Brakes and Hubs for 3500-lb AL-KO Axles
- Testing the Amperage Draw of Trailer Brake Magnets
- Recommended Electric Brake Assemblies for 10 Inch Hubs
- Troubleshooting Electric Trailer Brakes That Only Work in Reverse
- Replacement Electric Brake Assemblies for Denali Trailer with Tandem 5.2K Lippert Axles
- Installing New Axle and Electric Brakes on an Interstate Loadrunner 6x12 Trailer Without Brakes
- Can Electric Brakes be Used on a Boat Trailer
- How To Remove Stuck Hub/Drum on etrailer 3,500 Lb Axle with Electric Brakes
- Electric Trailer Brake Assemblies to Fit 10x2-1/4 Inch Dexter Drum
- How To Tell The Difference From Right and Left Electric Brake Assemblies
- Guide for Adding Brakes to a Pop Up Camper Axle
- Replacement Parts for Dexter Brakes 10 Inch by 1-1/2 Inch