bing tracking image
Q & A Icon

Does MaxxAir II Vent Cover Attach to Vent or Trailer


I appreciate Jamesons installation instruction for an Airstream Internaltion with Fantastic vent. One question when he instructs to drill, where are we talking about? Are more holes in the roof required to mount this? Ok, technically thats two questions...


Expert Reply:

In the attached install instructions the drilling that is required is for the vent frame that is installed on the trailer and not drilling into the trailer.

1.Determine which side of vent to install hinged brackets and install them with included screws.
2.Position the cover in place and mark the positions of the hinged mounting brackets.
3.Drill 3/16" holes in the marked positions, and attach the hinged brackets with included screws.
4.Close MaxxAir II and mark locations of cover's feet on side of vent opposite the hinges.
5.Mark positions of brackets, drill 3/16" holes in the marked positions, and attach the remaining brackets with included screws.
6.Close the cover and install the 2 snap lock pins.
7.Push the snap lock pins down into the lock position.

expert reply by:
Jameson C

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Similar Expert Q&A Pages