Will Brake Assemblies AKEBRK-6L and # 23-106 Both Attach to Flange 4-44-1
Question:
Fixing up our old trailer. I need 2 new elec brake assemblies. 12inch Dia with 2inch wide shoes. I see on your website there are a couple that look like they would work. p/n 23-106 and p/n AKEBRK-6L What is the difference? Will they both fit on your p/n 4-44-1 mounting plate? Thanks for your help.
asked by: Brian
1
Helpful Expert Reply:
Both brake assemblies you mentioned will fit the mounting flange part # 4-44-1 that you referenced.
Both assemblies are essentially the same thing made by two different companies. The part # AKEBRK-6L and # 23-106 are both 12 inch by 2 inch assemblies that mount to 5 bolt mounting flanges that are manual adjust.
helpful expert reply by: Jameson C
1
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Electric Trailer Brake Assembly - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Bolt Pattern of 5 Bolt Brake Mounting Flange for Trailer Brakes
- Do Electric Trailer Brakes With Parking Brake for 6k Axle Work on 7k Axle
- Is a Gap Between a Trailer Brake Backing Plate and Drum Normal
- Is there a Brake Mounting Flange that Has a 3 Inch Diameter Center Hole
- How To Choose The Correct Brake Mounting Flange For Your Trailer Axle
- Where to Mount the Brake Mounting Flange 4-44-1
- Dimensions for a Brake Mounting Flange for a 3 Round Axle
- Will 5 Hole Brake Backing Plate fit Mobile Home Axle
- Installation of Redline Brake Mounting Flange # 4-44-1
- Recommended Brake Mounting Flange To Welded On Brake Assemblies
- How to Determine the Capacity of 2 Inch Square Axle
- Availability Of Brake Mounting Flange With 3" Inside Diameter
- Is Trailer Brake Mounting Flange part # 4-44-1 Sold Individually
- Parts Needed To Replace Warner Brakes On Trailer With Standard Brakes
- Dimensions of the Brake Mounting Flange # 4-44-1
- 5-Bolt Brake Mounting Flange for 3" Axle Tube
- Parts Needed to Add Electric Drum Brakes to a Trailer with Tandem 5,200 lb Axles
- Converting to Electric Over Hydraulic Disc Brakes on 5,200 lb Axle
- Spindle, Brake Flange, Hub, & Electric Brakes For Custom 5,200 lb Axle
- Replacement Brake Assemblies that Use 5 Hole Round Brake Mounting Flange
- Left and Right Hand Assemblies for 12 " Electric Trailer Brake Replacement
- Electric Brakes for 6,000 lb Axle With 16 Inch Wheels
- Brake Flange Needed to Install 12 Inch Brake Assemblies With 5 Bolt Mounting Holes
- Recommended Nut and Washer for Use with the Brake Mounting Flange part # 4-44-1
- Will Brake Mounting Flanges be Installed on New Axle
- Parts Needed to Add Electric Brakes to Trailer With 12,000 Pound Air Brakes
- Brake Mounting Flange That Fits 2,000 lb Axle
- Parts to Convert From Electric Brakes to Electric Over Hydraulic Disc Brakes on 6,000 lb Axle