Replacement Key Recommendation for Southco Slam Latch

Question

Question:

Is the lock keyed with a R001 key?

asked by: Irv

0

Expert Reply:

There is a replacement key for the Southco Slam Latch made by Lippert. You will need replacement key # LC230012. All of the keys are the same that unlock this latch.

If you have this latch this key will work for it.

expert reply by: Jameson C

0

Answer 1

The lock code could be located on the key itself, on the face of the lock core, or one a sticker attached to the lock (see photos). Once you find this you can then order the correct replacement key assuming you have a Global Link, Fastec (FIC),…

view full answer...

Answer 2

For Slam Latch baggage door locks use #LC230012 for factory Lippert latches.

view full answer...

Answer 3

If you have a Lippert Slam Latch Baggage Door Handle then they all use the same key which is the Replacement Keys for Lippert Slam Latch Baggage Door Handle part #LC230012. There's usually a brand on a sticker inside the latch so if you have…

view full answer...

Answer 4

You are going to want to stay with the Lippert Slam Latch 642063 #LC54PJ as that is what you already have. This latch is different than our other compartment door latches so fitment would be an issue on your 2019 Grand Design Solitude 3740BH-R.

view full answer...

Answer 5

The Lippert Lippert Slam Latch for RV Doors #LC54PJ has a bit of a unique design since it tapers inward as you get closer to the plunger, so you wouldn't want to swap it out with anything else unless you were ok with making modifications to the…

view full answer...

Answer 6

The Replacement Lock Cylinder #LC213116 does not come with a replacement key but you can order them separately with part number #LC230012.

view full answer...

Answer 7

We only carry the Keyed #LC54PJ version of the Lippert Slam Latch.

view full answer...

Answer 8

We've had this question come up before and I have linked a couple pictures below to see if they match up to what you have. If so you can use the Lippert Standard Baggage Door Latch Kit - Black item #LC317649 to replace your LCI slam latch. I have…

view full answer...

Answer 9

It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 #LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again. Zero Point Calibration The…

view full answer...

Answer 10

The holes you will need to access to install the Lippert Components Universal Slide Out Wear Pad part #LC103480 on the inner tube should be accessible once you extend the slide but if you can let me know exactly what slide you have, I may have more…

view full answer...

Answer 11

Hey Jerry, The power and ground wires should be the same gauge so if your Samlex 1000w inverter calls for 2 gauge wiring for the power the ground would also need to be 2 gauge wire. If you're going further than 3 feet with the wire while…

view full answer...

Answer 12

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Replacement Key Recommendation for Southco Slam Latch

Product Page this Question was Asked From

Continue Researching