bing tracking image
Q & A Icon

Recommended Tow-Bar Wiring Harness For 2014 Jeep Wrangler

Question:

Hopkins Custom Tail Light Wiring Kit - HM56200? Im in the process of ing needed accessories to tow a 2014 Jeep Wrangler behind my RV. For wiring, Im believe the Hopkins is a good option, but I have 2 questions: 1 Does it provide the protection needed to fully isolate the Jeep electrical system from the RV? 2 I previously purchased the Curt trailer wiring harness from etrailer to tow a trailer behind the Jeep. Will the Hopkins harness allow me to plug in the Curt harness to tow the Jeep behind the RV, or tow a trailer behind the Jeep?

0

Expert Reply:

The tow bar wiring I recommend for your 2014 Wrangler is the Hopkins Custom Tail Light Wiring Kit, part # HM56200. This system is not used with the 4-way connector you have on your Jeep for towing. Our installers have found that the trailer towing harness you have on your Jeep will need to be un-installed so that the flat-tow wiring harness can work properly.

This kit plugs into the wiring behind the tail lights on your Jeep. You then just run the 4-way connector up to the front of the Jeep.

You will then need an extension adapter like part # 787196 to connect the Jeep harness to the RV connector.

I have attached a link to a helpful article that explains flat-towing . If you have any questions about products you need to complete the system let me know and I will be glad to make some recommendations that will work for you.

expert reply by:
0
Jeffrey L

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>