Using The Curt Trailer Hitch Support Strap On 2009 Ford Edge Limited With Spoiler
Question:
I purchased and installed the curt class III hitch and the stabilizer strap. There is no way to attach the clip on the hatch because of the spoiler and even if you could get the clip on, the pressure pulling down on the spoiler would break it. We are using an aluminum cargo carrier and would like to know how to stabilize the carrier.
asked by: Rhonda B
Expert Reply:
Curt requires the Hitch Support Strap, # 18050, for use with any hitch accessory. They suggest putting a cloth or pad under the strap where it comes in contact with vehicle paint to protect your vehicle. They aren't very specific about how to install it when there is a notable issue like a spoiler that could be damaged. So, you will have to determine if you want to risk voiding the warranty on your trailer hitch receiver and using it without the strap or if you want to risk issues with the spoiler on your 2009 Ford Edge.
To further stabilize a carrier, I suggest using an Anti-Rattle pin like the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span, # 63232.
Products Referenced in This Question
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Trailer Hitch Lock
- Universal Anti-Rattle Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Spring-Loaded Pin
- 3-1/2 Inch Span
- Lets Go Aero
more information >
Product Page this Question was Asked From
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Bike Racks for Electric Bikes
- Q&A: Recommended Platform Bike Rack for a 1-1/4 Inch Hitch
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: 2017 Volkswagen Golf Hitch Receiver and Bike Rack Recommendations for Good Ground Clearance
- Article: How to Choose a Hitch-Mounted Bike Rack
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Q&A: Trailer Hitch and Wiring for 2014 Jeep Patriot
- Q&A: Hitch Extension Availability for 2001 Ford F-350
Jason S.
11/15/2016
Curt requires the Hitch Support Strap, # 18050, for use with any hitch accessory. They suggest putting a cloth or pad under the strap where it comes in contact with vehicle paint to protect your vehicle. They aren't very specific about how to install it when there is a notable issue like a spoiler that could be damaged. So, you will have to determine if you want to risk voiding the warranty on your trailer hitch receiver and using it without the strap or if you want to risk issues with the spoiler on your 2009 Ford Edge. To further stabilize a carrier, I suggest using an Anti-Rattle pin like the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span, # 63232.