How Many Straps Do I Need to Secure My Yakima Big Horn to My 1993 Honda Accord  

If you have a Curt Class I or Class II 1-1/4 inch by 1-1/4 inch trailer hitch receiver, you would need the Curt trailer hitch support strap with a cambuckle, part #18050. This strap will provide additional stability and support to the Kuat NV 2.0…

The Draw-Tite #24965 and Curt #C11402 are a lot alike. They both install on your 2018 Hyundai Sonata in basically the same fashion and have the same weight capacities. They do look a little different because the Draw-Tite has a square cross tube…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…