bing tracking image
Q & A Icon

Measurements of B&W Clevis Adapter for Tow and Stow 2-1/2 Inch Ball Mounts

Question:

I would like to know if you have this item in a 2inch receiver that still has the 14,500 rating. Also, what is the size of the connectors and what is the spread of the pin pints. I have an existing hitch with 1inch spacing.

0

Expert Reply:

Unfortunately, the Clevis Adapter for 2 inch hitch ball mounts, part # BWTS35100B, is only rated for up to 10,000 pounds.

The # BWTS35200B you asked about measures approximately 2-3/4 from center on center between the mounting holes and the pins have a 1/2 inch diameter and have a usable length of about 4-1/2 inches.

expert reply by:
0
Charles S

Products Referenced in This Question


Product Page this Question was Asked From


Follow up Questions


Randy M.
Can the bwts35200b except an adapter plate under the 2 5/16 For a sway bar to pull a camper Of 7500 lbs
Etrailer Expert
Reply from Chris R.

I don't recommend adding a tab and sway bar setup to the Clevis Adapter. This will likely put too much torque on the adapter and may lead to damage down the road.

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>