Tips for Finding Where to Drill Hole for Bulb and Socket Tow Bar Lighting Kit
Question:
where do you drill the hole in the tail light assembly to install the rm-155.
asked by: James R
0
Expert Reply:
Specific drilling locations for the bulb and socket kits like the part # RM-155 aren't available since they are universal fit kits but Roadmaster does have some tips that will help you find where to drill.
RoadMaster states to look for a location to mount the bulb sockets inside the taillight housings. The mounting point should be as flat as possible, and must meet the following conditions: 1 - the bulb sockets must be installed underneath red lenses: and 2 - there must be at least 1/4 inches clearance between the bulbs and the lenses. The bulbs must be installed underneath red lenses. If the sockets are installed under amber or clear lenses, driver behind the towed vehicle will not be alerted when the motorhome stops.
I attached an install video for this kit on a similar Ram as yours for you to use as a guide too.
expert reply by: Jameson C
0
Product Page this Question was Asked From
Roadmaster Tail Light Wiring Kit with Bulbs
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Bulb and Socket Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Where To Install Bulb Socket Kit for Flat Towing 2005 Jeep Grand Cherokee
- Will Roadmaster Tail Light Wiring Kit with Bulbs Part # RM-155 Work on a 2007 Jeep Wrangler X
- Flat Towing Lighting Solution for a 2012 Buick Enclave
- Is Brake Light Relay Required When Using Hopkins Tail Light Wiring # HM56300 in 2010 Honda CR-V
- Why is RoadMaster Tail Light Wiring Kit # RM-155 Not Recommended For a 2011 Chevrolet Malibu LT
- Wiring Options for Flat Towing a 2006 Mini Cooper
- Wiring Harness to Flat Tow a 2015 Jeep Wrangler Behind a Motor Home
- Gauge Wire in the Roadmaster Tow Bar Lighting Kit RM-155
- Additional Wiring Parts Needed to Flat Tow a 2012 Jeep Liberty Behind a RV
- Are Light Sockets in # RM-155 Available Separately From Rest of Kit
- Which Bulb and Socket Flat Towing Lighting Kit for 2013 Honda CR-V
- Tow Bar Wiring/Lighting for a 2015 Chevy Colorado
- Why Does Vehicle Battery Have to Be Disconnected to Flat Tow
- Why Ground Wire Is Required On Towed Vehicle When Installing Tow Bar Wiring
- Are Diodes Needed When Using the Roadmaster Tail Light Wiring Kit # RM-155 on 2014 Buick Enclave
- Tow Bar Wiring Recommendation for 2016 Volkswagen Golf
- Will the Roadmaster Taillight Wiring Kit # RM-155 fit a 2007 Saturn Vue
- How Do You Replace Burned Out Bulbs of a Bulb and Socket Flat Towing Wiring Kit
- Is a Supplemental Braking System Required when Flat Towing a Vehicle Behind a Motor Home
- Installing Roadmaster Brite-Lite Converter # RM-732 with Roadmaster Tail Light Wiring Kit # RM-155
- Recommended Tow Bar Wiring For 2017 Chevrolet Sonic LT
- Will the RoadMaster Tail Light Wiring Kit # RM-155 fit a 2011 Ford Fusion
- Tow Bar Wiring that Does Not Require Splicing for a 2015 GMC Canyon
- Installation Details for RoadMaster Tail Light Wiring Kit with Bulbs # RM-155 on 2008 Buick Enclave
- Tow Bar Lighting Recommendation for a 2002 Chevy Tracker
- Will the Roadmaster Tail Light Wiring Kit, # RM-155, Fit in 2010 Ford Escape Lens Housing
- What Tow Bar Wiring Kit Is Needed For A 2001 Chevrolet Tracker
- Can a 2004 Ford Focus ZX5 with Automatic Transmission be Flat Towed Behind a Motor Home
- Will the Roadmaster Tail Light Wiring Kit With Bulbs Fit in a 2012 Chevy Sonic Tail Light Housing