Tie Downs For 1999 Ford F-250 Superduty With Torklift Brackets  

The main difference between the Torklift Locking FastGun Turnbuckles, #TLS9522-2-LK, and the AnchorGuard Derringer Turnbuckles, #TLS9020, is how the camper tie-downs are mounted on your truck. The FastGun #TLS9522-2-LK are designed to be used with…

Inserts are not sold individually so you'd need the whole tie-down kit. For your 2001 Ford F-350 the rear tie-down is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLF3001. The front will depend on your bed length, and so long as…

The Derringer set you referenced is only available in a set of 4 that has two longer and two shorter turnbuckles but we do have the Torklift Springload part #TLS9050A which is a set of two that has a range of 35 to 45 inches which is similar to the…

We can get you set up with rear tie-downs for your 2007 Ford F-250 short bed with a factory hitch and no running boards to go with your current front TorkLift Custom Frame-Mounted Camper Tie-Downs #TLF2007. However, since you already have TorkLift…

The reach for the set of the TorkLift AnchorGuard Derringer Turnbuckles #TLS9020 is 18-1/2" - 25-1/2" for the front set and 28-1/2" - 34-1/2" for the rear sets. For a set that can go up to 43 inches for it's reach the TorkLift…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

Hey Tim, Good questions, and camper tie-downs are always a touch confusing so I can explain the difference for you between the two TorkLift camper tie-downs for your 2016 Ford F-250 long bed with factory hitch and no running boards. The difference…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…