Video of RhinoFlex Hose part # CAM39761 Installing in RV Bumper  

While we have an option for you, both of the hoses from the EZ Coupler RV Sewer Hose Kit - (2) 10' Long Hoses #D04-0115 will be 50 inches when collapsed, which is too long for your 4 foot bumper. You can use one of the 10 foot hoses, the EZ…

The fittings of the RhinoFLEX RV Sewer Hose with Swivel Fittings, 4-in-1 Adapter, and Storage Caps #CAM39761 will not fit in your bumper that is 3-3/4 inches (the bayonet fitting on this is the standard 4-3/16 inches), but the fittings are actually…

The RhinoFLEX RV Sewer Hose Extension with Swivel Lug and Bayonet Fittings #CAM39765 and similar items do have removable orange fittings but there are not replacement parts available. If you have the fittings then you just need the hose #CAM39671. If…

To fit the hose in the bumper you will have to take the orange collars off the ends of the RhinoFLEX hose. There should be side storage on your trailer that you can store these and other items in allow the hose by itself to fit as intended. This is…

I spoke to my contact at Camco and he said that if the lug end of the part #CAM39761 doesn't want to fit into the bumper of your trailer your best option would be to grind down two of the lugs and the hose would then fit.

We have had someone tell us the swivel fittings that particular hose won't fit in the 4 inch bumper of your trailer, and the manufacturer said they could grind down two of the lugs and the hose would then fit. We do have a video which I've…

Yes, the Camco RhinoFLEX RV Sewer Hose #CAM39761 would fit sewer hose doors like the #37231035.

The parts included with the Camco RhinoFLEX RV Sewer Hose #CAM39761 will include two storage caps and a 4 in 1 adapter. Here is a breakdown of everything included: 1 15 foot long hose 1 bayonet fitting. 2 storage caps. 1 elbow fitting. 1 4-in-1 dump…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…