bing tracking image
Q & A Icon

Is Distance From Mounting Flange To Front Of Hub Between Idler And Brake Hubs On Axle-Less System

Question:

If I install idler hubs on this unit, will the hub face distance be 6 inches as is shown in the attached drawings? Also, if I choose at a later date to install brakes, will the hub face distance remain at 6 inches?

0

Expert Reply:

When using an idler hub or a hub and drum with brakes on the Timbren Axle-Less Trailer Suspension System, part # ASR2000S02, the difference in the distance from the bracket to the front face of the hub as shown in the attached drawing would be the same.

The # ASR2000S02is designed for trailers with one or two axles and has a weight capacity of 2,000-lbs. One note: If your trailer does not have a crossmember above the place where you are installing the Timbrens, you may need to reinforce the trailer frame.

click to enlarge
expert reply by:
0

Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>