Dimensions of the Ring and the Bolts in Recessed Trailer D-Ring Tie Down with Backing Plate # RR5K  

Depends on the condition of the wood but the backing plate of the Brophy D-Ring Tie Down Anchor w Backing Plate #RR5K that you referenced is designed to distribute the weight so that it does not easily rip through the wood. I attached a picture of…

We may not have a straight axle solution but we do have axle-less options. I have included a link to them for you. The great thing about these systems is that they have the suspension built in, sort of like a torsion axle. And ground clearance is…

There's a bit of wiggle room for the hole size needed to install the Brophy D-Ring Tie Down Anchor #RR5K but 3-1/2 inch diameter is the hole size that our installers found worked the best so it would be what I would recommend.

I went out to the warehouse to measure the square holes in the Trailer D-Ring Tie Down, #LRB1. According to my measurements it will accept bolts no larger than 7/16 inches in diameter. A 3/8 inch bolt would probably be the most ideal size to use.

The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with…

Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…

The Dee Zee Specialty tool box #DZ6535P should work as a tongue tool box for your trailer dimensions. The overall dimensions of this tool box are: 35 inches long by 14 inches wide by 13 inches tall. Please check these measurements with your trailer…

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as…

For a tie down D-Ring that doesn't have a weld to fail like your current tie-down you'd have to transition to a different design like the etrailer D-Ring Tie Down Anchor #RRING-Q6000. The options we have with the same design that…

You can use either of the adhesives for permanently installing the Small Coin Pattern Vinyl Flooring #TS37FR to your utility trailer: - Vinyl Over Wood #TS76FR - Vinyl Over Wood, Metal, or Concrete #TS86FR Both options come in a Gallon tub and…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck…

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328…