Material Used and Tensile Strength of TruRyde Spindle # TRU84FR
Question:
What type of steel is this made of? Or can you give an approximation of the yield strength?
asked by: John W
0
Expert Reply:
According to TruRyde, the bar stock material used on spindles like # TRU84FR is SAE 1045 hot rolled. This allows the spindle to harden to an extent, but it is a medium tensile steel with a tensile strength of 570-700 MPa and Brinell hardness ranging between 170 and 210.
The spindle is designed to retain a slight amount of flex to retain its durability when a trailer goes over a bump or through a hole in the road.
TruRyde Spindle # TRU84FR is rated for use on 3,500 lb axles.
expert reply by: Jameson C
0
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Similar Expert Q&A Pages
- Recommended Replacement Disc Brakes For A 2008 Trail-Rite With UFP DB-42 Brakes
- Replacement Axle for a 1991 Lowe Boat Trailer
- Replacement Spindle and Hub for my Lippert 3500# Axle
- Do I Need to Replace #84 Spindle With Rust On Surface and What Bearing Kit Do I Need
- How to Grease Trailer Bearings and Spindle without EZ Lube Axle and Spindle
- Finding the Correct Spindle Size for Hub
- Spindle Replacement Recommendation For Donahue Horse Trailer
- 6-Lug Hub to Fit Spindle for 3,500 Pound Axle
- Longest Replacement Trailer Spindle with 6 Lug Hub
- Parts Needed to Add Electric Drum Brakes to a 2003 Haulmark Trailer
- Trailer Spindles, Hubs, Wheels and Tires For Building a Specialty Cart
- Replacement Hub For Boat Trailer Using Bearings L68149 And L44649
- Mounting Bolt Pattern of 10 Inch Electric Drum Brake Assemblies
- Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 Bearings
- Compatibility of Dexter 3500-lb 5-on-5 Trailer Hub # 84550BX with TRU84FR Spindle
- How to Determine Which Replacement Hubs Will Fit Spindle
- What Spindle Will Work for Trailer Hub Assembly with L68149 Inner and L44649 Outer Bearings
- Replacement Hub, Bearings, Races, and Seals for Trailer Hub with H-1377 Bearing
- Welding #84 Spindles # TRU84FR and # TRU57FR for Utility Trailer with 2-3/8 inch O.D. Pipe
- What Size of Spindle is Needed for a 3,500-Lb Axle
- Replacement Hub for Trailer With Timken 158123 Inner and 09067 Outer Bearing
- Availability Of 5-5 1/2 Inch Hub Assembly, Spindle, Bearings Rated For 1,750 lbs. Each
- Adding Jeep Wheels and Tires With 5 on 5" Bolt Pattern To 4' X8' Harbor Freight Trailer
- Distance From End of TruRyde #84 Spindle Stub to the Back of an Installed Hub