Side Plate and Bolt Hole Spacing Measurements for Curt Trailer Hitch # C14082
Question:
Can you tell me the length of the side plates and the bolt spacing? Is the cross bar 3inch x 3? My RV frame measures 34inch from outside edge to outside edge. Ive researched the weld-on hitches and they would interfere with body mounts located on the outside of the frame rails..
asked by: Bob K
0
Expert Reply:
I went out to the warehouse to take some measurements of Curt trailer hitch # C14082. I made a picture showing the measurements for you.
The bolt holes, starting from the one furthest forward on the vehicle, measures 2-3/4 inches to the center of the next hole.
The center of the second hole to the center of the round clearance hole is 2 inches.
And from the center of that round clearance hole to the center of the last hole is 1-5/16 inches.
The crosstube is 2-1/2 inches square.
The tops of the side plates are 9-3/4 inches long. The overall length is 11-3/8 inches.
click to enlarge
expert reply by: Michael H
0
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Similar Expert Q&A Pages
- Trailer Hitch Recommendation for 2019 Chevy Express 4500 Cutaway Chassis
- Curt Trailer Hitch Receiver and Wiring Harness For a 1984 Chevrolet Short Bed C/K Pickup
- Curt Trailer Hitch Receiver # C14082 Tube Height From Mounting Flange For 1973 Ford F-100
- How Wide is Hitch Mounting Bracket of Curt Hitch part # C14082
- Will the Curt Hitch Part # C14082 Work with the Spare Tire on a 1986 Chevrolet C/K Series Pickup
- Recommended Hitch Receiver for a 1971 Chevrolet C/K Series Pick Up
- Class V Hitch for 2003 GMC Savanah Cutaway
- Bolt Hole Spacing of Curt Class IV Hitch Receiver 14082
- Trailer Hitch Receiver Fit on 1998 Chevy 3500 Cab & Chassis
- Trailer Hitch for a 1979 Chevy C-10 with Trailering Special Package
- 1966 Chevy C10 Short Bed Truck Trailer Hitch Fit
- Does the Curt #14082 Require Modification to Work with Under Bed Mounted Spare Tire?
- Recommendation for Class 5 Hitch to Fit 1995 Ford F350 with 34 Inch Frame and Flat Dump Bed
- Availability of Class IV or Class V Hitch Receivers for 1996 Ford F-250/350 With Bucket Truck Frame
- Distance from Mounting Bracket to Top of Receiver on Curt Trailer Hitch # C14082
- Trailer Hitch Receiver and Brake Controller Recommendations for 1977 Ford F-150 4X4
- Will Curt Class IV Trailer Hitch Receiver Fit 1974 Ford F-250 with Standard Bumper and 34 Inch Frame
- Trailer Hitch Recommendation for 1980 Chevy C10 Stepside
- Universal Hitch for a 2009 Chevrolet Savanna/Express Van School Bus
- Is There a Hitch Available for a 1986 Chevy CUCV M1008 Military Truck on a Chevy C/K Platform
- Recommended Trailer Hitch and Wiring for 1965 International Travelall
- Recommended Trailer Hitch for 1985 Chevy C20 That Works With Rear Spare Tire
- Class IV Trailer Hitch that Fits 1971 Chevy C20 Truck with Standard Bumper
- Will Curt Hitch C14082 for 1979 Chevy C/K Series Pickup Work with Spare Tire
- Trailer Hitches and Wiring for a 1993 Chevy 1500 Truck and 1999 Chevy Suburban
- Curt Trailer Hitch Recommendation for 1980 Short Bed Chevy Truck with Standard Bumper
- Availability of a Trailer Hitch to Fit a 1974 Ford F-250 4x4 Crew Cab