Wheel Recommendation for Timbren Axle-Less Trailer Suspension System # A12WS545

Question

Question:

Ive got stock 2011 Jeep Wrangler wheels 5 bolt pattern Im looking slap on my trailer but hoping this product will accommodate them? Are they compatible? Thanks!!!

asked by: Hads

0

Expert Reply:

After doing some research on the 2011 Jeep Wrangler, it appears the bolt pattern of the OEM wheels is 5 on 5 inches. If that is the case, they will not be compatible with the hubs that come with the Timbren Axle-Less Trailer Suspension System, # A12WS545, that you referenced in your question. The hubs and spindles included are designed for 5 on 4-1/2 bolt patterns. If you are unsure of your wheel's bolt pattern, I have included a helpful article that explains how to measure this.

I do have a solution for you, however we do not currently offer a Timbren Axle-Less system that includes 5 on 5 inch hubs.

I instead recommend using the Timbren Axle-Less System # ASR1THDS02. This system is similar to the system you were looking at but it has a weight capacity of 2,200 lbs and does not come with any hubs, so you can add compatible 5 on 5 inch hubs like # AKHD-550-35-K to accommodate your Jeep Wrangler wheels. There are no 5 on 5 inch hubs available for our axle-less systems rated lower than 2,200 lbs.

Another big factor to consider when using Jeep Wheels on a trailer is the available space the kit will give from the hub face to the trailer frame. You will want to check the backspacing of your tires and wheels to make sure the Timbren Kit you choose will provide enough clearance for your tires. The backspacing is the distance from the surface of the wheel that mounts to the hub to the inside wall of the tire. The backspacing clearance on the Timbren # ASR1THDS02 is 8-1/2 inches. I have provided an image with this dimension listed so you can get a better idea of this measurement.

I have included a video demonstration of the Timbren Axle-Less System for your review.

expert reply by: Chris R

0

click to enlarge

Answer 1

I would not trust the Timbren Axle-Less Trailer Suspension System ASR1200S01 to be used as an overlanding trailer with those large jeep wheels. I have included a picture that shows what I believe to be a failure point with this suspension. With that…

view full answer...

Answer 2

The best recommendation we offer for what you are looking to do is the Timbren part number #ASR1THDS02 as it has a 2,200 lb capacity and is setup for off-road tires like you would need as well.

view full answer...

Answer 3

In off-road situations it's gets a little more tricky with adding brakes to the trailer and having them actuate properly since the terrain changes a lot and traction is really inconsistent. I'd go with the part #ASR1THDS02 and idler hubs like…

view full answer...

Answer 4

In order to use the #84655UC1-EZ hub with the desired 6 on 5-1/2 bolt pattern, you'd need to use a Timbren Axle-Less suspension that has spindles compatible with a L68149 inner/L44649 outer wheel bearing like #ASR1THDS02. The hubs have a 3500 lb…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

view full answer...

Answer 7

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 8

There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…

view full answer...

Answer 9

Yes, the DeeMaxx Disc Brake Kit #DE66YR will allow you to use 14" trailer wheels.

view full answer...

Wheel Recommendation for Timbren Axle-Less Trailer Suspension System # A12WS545

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching