Compatibility of the Sportframe Drawbar and a 2 Inch Trailer Ball With 3/4 inch Shank
Question:
3594 Sportframe Drawbar 4inch Rise 2000# Kit - 3594 A-82 Hitch Ball with 2inch Diameter and Med Length Shank, 3,500 lbs GTW - Stainless Steel - A-82 Does the combination fit well?
asked by: Jimyi
0
Expert Reply:
The Sportframe Drawbar with 4 inch Rise # 3594 is designed to have a trailer ball with a 3/4 inch shank to be mounted to the drawbar.
If you need a 2 inch ball, then # A-82 with a 3/4 inch shank will be compatible with the Sportframe drawbar. This trailer ball has a 3,500 lbs capacity
Now, If you happen to need the smaller 1-7/8 inch trailer ball, then I recommend # A-80. This ball is rated a 2,000lbs capacity.
expert reply by: Jared P
0
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 0 Inch
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- Class I
- 2000 lbs GTW
- Draw-Tite
more information >
Similar Expert Q&A Pages
- Will the Draw-Tite 3594 Get Me Close to 16 of Rise if My Hitch is 11 1/2 Off the Ground?
- How to Measure Ball Mount Rise for Draw-Tite Sportframe Ball Mount # 3594 on a 2002 Buick Regal
- Recommended Ball Mount Draw Bar For 1-1/4 Inch Trailer Hitch Receiver With 4 Inch Rise
- Lock Pin Hole Measurement for Class I Hitch
- Does Suspension Sag Factor When Picking Out Correct Rise/Drop Ball Mount
- Towing a Trailer with 2014 Mustang GT vs 1999 Honda Civic Coupe
- Will Sportframe Drawbar # 3594 Fit Kubata RTV Receiver
- Why do Some Ball Mounts Have a Drop and Rise and Others Only have a Rise
- Pin Hole to Hitch Opening Distance on 2 inch and 1-1/4 inch Hitches
- Ball Mount Recommendation for a 2014 Subaru Forester with a Curt Hitch # C12100
- Dimensions Of Draw-Tite Sportframe Ball Mount # 3594
- What is the Proper Rise/Drop Ball Mount for a 2006 Honda Civic
- Which Ball Mount and Hitch Ball Should I use with My Draw-Tite 24797 on my 2009 Kia Rondo
- 1-1/4-Inch Ball Mount with 4-Inches of Drop
- Ball Mount For 1-1/4 Inch Hitch On a 2002 VW Beetle with 4 Inch Rise
- Will Thule EasyFold XT Fit A Class 1 Trailer Hitch with 1-1/4 Distance from Hitch Pin Hole
- How to Measure to Determine How Much Drop Is Needed for a Ball Mount
- Recommended Ball Mount for 2010 Ford Fusion Towing Haul Master Trailer
- How to Pick Out Correct Ball Mount for 2015 Ford F-150
- How To Determine What Size Ball Mount Will Fit On 2006 Chevy HHR
- Ball Mount Recommendation that is 4 inches Shorter than the Sportframe Ball Mount part # 3594
- Which is Correct Ball Mount for 1997 Chevrolet Lumina w/ Draw-Tite Trailer Hitch # 24628
- Trailer Hitch and Wiring for a 2016 Subaru Impreza Sedan
- How to Determine Where Ball Mount Platform for 3594 Will End Up When Installed on 1998 Buick Regal
- 7-Way for 2017 Honda CR-V and Ball Mount With 2 Inch Hitch Ball
- Trailer Hitch Fit For 2015 Ford Fiesta ST Hatchback
- What Is The Highest Capacity Trailer Hitch Available For A 2021 Mazda 3 Hatchback?
- Parts Needed To Tow a Motorcycle With a 2012 Ford Fusion